• 2

U1010+SSD問題?

U1010買來很久了,但是因為速度問題幾乎很少碰到他... 縱使後來降級成XP還是一樣...
後來看到SSD真有如"威爾剛"可以讓他再現雄風,頓時興趣又回來了!
請問目前有哪款SSD適合他?Intel X18-M可以用嗎?還是OCZ Vertex等等?
麻煩各位先進解惑,讓我能夠真正的好好享受下U1010帶來的樂趣!

對了,另外請問如果換裝了SSD後是否用回原來內建的Vista也ok跑起來也一樣順?
對了,再請教下,可以改裝成2G or 更多的ram嗎?

謝謝啦:)
2009-04-24 0:53 發佈
文章關鍵字 U1010+SSD 問題
I have already replaced the HDD by PhotoFast 1.8" 32G SSD.
The RAMs are on board and cannot be upgraded.
You can use the recover disk originally bundled to recover
everything. But you have to apply patch from microsoft service patch
afterwards.
Hope this could help.

Cheer


您好,感謝您的回復!
請問這款跟Intel X18-M比起來怎樣?
他的效能跟原本的比起來好多少?

另外,OCZ Vertex有他可以用的嗎?
對了,我看到Mtron的也有,他是SLC的,不知道PhotoFase是SLC還是MLC ? 哪個效能比較優?

感謝!
先說
我沒u1010
之前有考慮想購入
無奈因為其CPU實在感覺有點不足
所以作罷

您說想換上固態硬碟
不是不行
我猜想
應該效能還是有限
礙於CPU嘛

我不曉得U1010可否於USB外接裝置開機
假若可以的話建議先試試看3.5吋的外接硬碟
或是效能較好的外接儲存裝置
便可清楚效能到底可以到多少
The X-18M is a SATA 1.8" SATA interface SSD , you can check:
http://download.intel.com/design/flash/nand/mainstream/mainstream-sata-ssd-datasheet.pdf.

According to some forum's discussion, the U1010 use HDD having 2 versions of interface,
both should be PATA category. One category is ZIF cable, the other is 50pin socket connection.
My U1010 is bought in HKG and use the latter one (socket type). I then use a conversion cable
to interface between the socket and the ZIF connector of the photofast 1.8" SSD.
The performance of the original HDD is around 15MB/s to 20MB/s using hdd tune 2.55
to measure and the photofast SSD is around 60MB/s.

The OCZ vertex is 2.5" SATA SSD as fast as I understand. The Mtron 1.8" 32G SSD is a SLC, using ZIF cable while the photofast 1.8" SSD is a MLC SSD.

Remember, the U1010 uses a 1.8" harddisk.

Hope this could help.

Cheers.



謝謝您的熱心回復!
已經購入Mtron 1.8" 32G zif2, 估計這周就會收到了.
容量對我來說夠了, 就是外出使用而已. 所以選擇了Mtron的, 希望這個選擇不會讓失望:)
對了,請問下樓上有用SSD的,請問您怎樣開UDMA6模式?
感謝了!
According to some information (Sorry I can't remember where is
the source), the chipset of U1010 can only work on UDMA 5.
Such limitation cannot be reduced by BIOS or drivers.
Thx


我只有sony ux380,去下載一個叫hdparm的程式for windows ,以mtron 3018 ssd來說,開跟沒開讀取從70MB/S進步到88MB/S,寫的速度沒變,一樣在50左右,U1010我沒有,所以實際狀況我不清楚
mtron MOBI-3000 1.8" ZIF SLC 32GB 用過寫入應可落在70MB/秒左右 讀取則為80       MB/秒
沒用軟體調校

Posted by GodSpeed
  • 2
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?