jasonyu007 wrote:
救命啊 !! 我的繁...(恕刪)
jasonyu007 您好！
有兩個可能
1.可能硬體故障(3G和WIFI是同一顆MODULE)
2.可以先灌DRIVER試看看。(http://corp.benq.com.tw/support/downloads/downloads.cfm?product=2997)
如果灌了還是無解,可以請您聯絡一下我們的維修中心(02-29028188)，我們再協助提供您一片光碟重灌。
BenQ 筆電超人
nelscan wrote:
我也裝了LINUX版...(恕刪)
依照外國論壇的說法.....
Although I've booted (briefly) Midinux on two different units with 3 different bioses - I have to admit I never bothered to check out the WiFi :(
So I put midinux back on the TIM (Telecom Italia Mobile) S6, which currently has bios 1785-3103-2C, booted up, turned the wifi on - 'NO WLAN device'.
Downgraded to 1703-1303-2C - 'NO WLAN device'
The next logical step would be the original bios - 1694-3113-2C - but I hadn't backed it up and didn't have it. After some googling, I found it:
http://mterrosi.blogspot.com/2009/10/benq-mid-s6-ripristino-bios-originale.html
http://rapidshare.com/files/267831416/ORIGINAL.ROM
I wasn't sure what switches to use with afudos, but since the 0303customer.exe file updated flash, nvram, bootblock, EC and destroyed the checksum, I decided to use the same switches:
afudos original.rom /p /n /b /e /c
and it gave the same output as before:
Bootblock checksum...OK
Module checksums...OK
Intel CMC ROM Hole Protected!
Erasing Flash...done
Writing Flash...done
Verifying Flash...done
Erasing NVRAM...done
Writing NVRAM...done
Verifying NVRAM...done
Erasing Bootblock...done
Wrtiting Bootblock...done
Verifying Bootblock...done
Erasing EC...done
Writing EC...done
Verifying EC...done
CMOS checksum destroyed
Program ended normally
rebooted, turned the wifi on - and it found the network and connected.
(for the first reboot, it seems normal to get the message 'CMOS Checksum Bad, press home to load default values and continue')
So that's one way to get the wireless working - but maybe Midinux could be hacked? Do the other MID Linux distros see the wireless device?
Anyway, I'll be putting XP back on this as I need to run windows programs...
看樣子應該是將BIOS用到最原始的版本後就可以順利的將WIFI開啟了....
網址轉載如下:
http://www.umpcportal.com/modules/newbb/viewtopic.php?topic_id=6962&viewmode=flat&order=ASC&start=15
內文搜尋
從 APP 打開
X