如題
請問SSD自己安裝作業系統格式要用ntfs還是fat32呢？這個有點搞不懂，那效能差在那裡呢？那如果自己改cf to ssd的話那格式要用ntfs還是fat32呢？
麻煩請有試過的高手解答一下謝謝
以下來自於 WIKI 說明 ：
FAT32
In order to overcome the volume size limit of FAT16, while still allowing DOS real mode code to handle the format without unnecessarily reducing the available conventional memory, Microsoft implemented a newer generation of FAT, known as FAT32, with cluster values held in a 32-bit field, of which 28 bits are used to hold the cluster number, for a maximum of approximately 268 million (228) clusters. This allows for drive sizes of up to 8 tebibytes with 32KiB clusters, but the boot sector uses a 32-bit field for the sector count, limiting volume size to 2 TiB on a hard disk with 512 byte sectors.
On Windows 95/98, due to the version of Microsoft's SCANDISK utility included with these operating systems being a 16-bit application, the FAT structure is not allowed to grow beyond around 4.2 million (< 222) clusters, placing the volume limit at 127.53 gibibytes.[11] A limitation in original versions of Windows 98/98SE's Fdisk causes it to incorrectly report disk sizes over 64GiB.[12] A corrected version is available from Microsoft. These limitations do not apply to Windows 2000/XP except during Setup, in which there is a 32GiB limit.[13] Windows Me supports the FAT32 file system without any limits.[14] However, similarly to windows 95/98SE there is no native support for 48bit LBA in Windows ME, meaning that the maximum disk size is 127.6GiB
FAT32 was introduced with Windows 95 OSR2, although reformatting was needed to use it, and DriveSpace 3 (the version that came with Windows 95 OSR2 and Windows 98) never supported it. Windows 98 introduced a utility to convert existing hard disks from FAT16 to FAT32 without loss of data. In the NT line, native support for FAT32 arrived in Windows 2000. A free FAT32 driver for Windows NT 4.0 was available from Winternals, a company later acquired by Microsoft. Since the acquisition the driver is no longer officially available.
Windows 2000 and Windows XP can read and write to FAT32 file systems of any size, but the format program included in Windows 2000 and higher can only create FAT32 file systems of 32 GiB or less. This limitation is by design and according to Microsoft was imposed because many tasks on a very large FAT32 file system become slow and inefficient.[11][15] This limitation can be bypassed by using third-party formatting utilities.[16]
The maximum possible size for a file on a FAT32 volume is 4 GiB minus 1 "null" byte (232−1 bytes). Video applications, large databases, and some other software easily exceed this limit. Larger files require another formatting type such as HFS+ or NTFS. Until mid-2006, those who run dual boot systems or who move external data drives between computers with different operating systems had little choice but to stick with FAT32. Since then, full support for NTFS has become available in Linux and many other operating systems, by installing the FUSE library (on Linux) together with the NTFS-3G driver. Data exchange is also possible between Windows and Linux by using the Linux-native ext2 or ext3 file systems through the use of external drivers for Windows, such as ext2 IFS; however, Windows cannot boot from ext2 or ext3 partitions.
FAT32 並沒有比較好；對 XP 而言，這是一個沒辦法發揮其特色的系統檔案格式。如果沒有其他顧慮，還是乖乖用 NTFS 比較好，而不是想東想西。
本人在 www.mobile01.com 發表之文章屬於本人之創作,
非經本人允許, www.mobile01.com 均不得任意額外使用.
內文搜尋
從 APP 打開
X