如果你手上有老iPaq, 先別急著賣掉歐!

如果你手上有老iPaq, 先別急著賣掉歐!

如果你手上的機種是-
iPAQ H3100, H3600, H3700, H3800 and H3900
(1900/5400 系列還未被支援)

就可以把Enbeded linux 刷進ROM, 變成一台全新的Linux PDA, 好玩吧?

(以下步驟可能具有風險, 請小心進行)
Hardware requirements
As well as the iPAQ itself, you will need either:

a CompactFlash memory card and a suitable sleeve; or
a host machine running a terminal emulator, connected to the iPAQ with a serial cradle or cable.
Note: a USB-only connection is not sufficient.
Some form of Internet connectivity is strongly recommended. Familiar supports these types of network connection:

CF/PCMCIA Ethernet
CF/PCMCIA wireless LAN
PPP over a serial line
USB connection to a host PC (requires special drivers on the host)
LAP or PAN connection using Bluetooth
--------------------------------------------------------------------
下載網頁:

請慎選機型跟你所要的build(developer, GPE, Qpie)
---------------------------------------------------------------------
截圖

Developer


GPE


Opie


---------------------------------------------------------------------------------------
安裝

下載IMG及boot loader 後, 可用以下方式安裝:

using ActiveSync -- if you have a machine running Windows with ActiveSync installed
using Synce -- if you have Synce (Linux clone of ActiveSync) installed
using a CF/MMC/SD card -- if you have a card and matching socket
using a FTP daemon -- if you have Internet connectivity to your iPAQ (preferred)
using Pocket IE -- if you have internet connectivity to your iPAQ
Continue with one of these installation steps:

Install via serial port
Install via Compact Flash sleeve

http://familiar.handhelds.org/familiar/releases/v0.7/install/bootldr.html
------------------------------------------------------------------------------------------

剩下的步驟請參考此處:

http://familiar.handhelds.org/familiar/releases/v0.7/install/index.html

-----------------------------------------------------------------------------------------