但是按照網絡提供方之wm6網絡連接建議設置，並無法成功連接到網絡，每次設置完畢，選擇連接的時候，提示輸入帳戶/密碼，輸入完畢，又彈出同樣界面要求再輸入，如此反復，最終提示：
“cannot log on to the wireless network. This network requires a personal certificate to positively identify you“
請問到底應該怎麽辦啊~
以下為網絡提供商的建議設置
Step 1: Turn on wireless network
1. The user must make sure the wireless network is enabled before doing configurations.
* Click Start Programs Comm Manager
* If the wireless icon has an X against it, click it to turn wireless on. Close the window.
Step 2: Configure sMobileNet settings
1. Configure wireless network
* Click Start Settings Connections tab Network Cards Wireless tab
(Note that your device may say Wireless Ethernet instead of Network Cards).
* A list of available wireless networks may be displayed.
o If the list shows sMobileNet as Available, then click on sMobileNet and choose Connect
o Otherwise, click on Add New... to configure.
2. Configure wireless network (General tab)
At the General tab:
* Type sMobileNet in the Network name: field (Note: The network name is case-sensitive)
* Select The Internet as the Connects to: drop-down list
3. Configure wireless network (Network Key tab)
At the Network Key tab:
* Select WPA as the Authentication method
* Select TKIP as the Data Encryption method
4. Configure wireless network (802.1X tab)
At the 802.1X tab:
* Select Protected EAP (PEAP) from the drop-down list for EAP type
* Click ok
You are done with the configurations of sMobileNet!
Access sMobileNet
Step 1: Connect to sMobileNet
1. Click on sMobileNet and choose Connect
Step 2: Logon to sMobileNet
1. The handheld device is trying to connect to sMobileNet. In the User Logon window:
* Enter your ITSC Network Account, such as cchelp, in User name: field
* Enter your password in Password: field
* Be sure to leave the Domain: blank
2. Click OK to close the window.
Step 3: Check the connection status
1. You have completed the logon procedure. The status of sMobileNet now changes to Connected
Congratulations! You have connected to sMobileNet!
感謝！！
