話說...看到大家換成英文版...我心裡癢癢的....
於是乎就跟他拼了...硬刷成英文版...
(抓大陸改過的Rom直接升級)
但是我後悔了...實在是用不習慣...
當初又沒有備份.....超想哭的....
過了兩各禮拜...神蹟出現了...
我看到同事居然有一台2210繁體....
二話不說當然把上借來還原....
插上SD卡...run著romupdate
d2s....哇咧只能用CF....找不到怎麼用SD的指令
心想...不管了把我512M CF拿出來拼了....
d2s終於成功了....
趕快把卡插到我的2210還原囉....
看著他run.....心想終於弄回來了
結果checksum fail.....
救命啊...有誰能救我~~
正確用CF備份的方式相當麻煩(要先用WinHEX改記憶卡格式)..
直接用CF(FAT16 or FAT32)備份的資料是不完整&錯誤的....是沒辦法還原滴!!
目前只能利用HP現有的ROM 改回英文繼續用了!!
要中文機的話只有等官方中文版出來再說了~~
Usage:d2s
d2s [StartAddr [Len [Type [Append[SkipStartAddr SkipLen]]]]]
Backup memory to storage.
StartAddr : Start address for backup(0xA0040000).
Len : Length of memory will be backup. And if not given value, it will be
Total ROM size on board - ((StartAddress & 0x0FFFFFFF) - (ROM base address(0) & 0x0FFFFFFF)).
Type : Which storage(cf/sd) type will be selected(cf).
Append : Backup methods(a/).
SkipStartAddr : Start address of skip area(0x0).
SkipLen : Skip length(0x0).
Skip area must be less than or equal to one block size of flash.
Skip area must not over two blocks, must inside one block.
Nand flash: Skip area size need be page boundary.
Nor flash: Skip area size need be DWORD boundary.
Notes:
Just run d2s without any argument for a complete backup of your internal flash storage. Otherwise, option values are difficult to figure out.
Make sure that "CheckSum is OK!" is displayed on your PDA screen when this command is complete.
s2d
Usage:s2d
s2d
Restore memory from storage.
上面我只看的懂d2s是把rom匯到記憶卡
s2d是反過來....
至於機器ID..我沒考慮這各問題
但是的確兩台的checksum指令得到的結果並不一樣
再來CF卡裡面的資料我不知道如何弄出來改??
電腦工程師,有問題可以找我討論
Raxel
內文搜尋
從 APP 打開
X