請各位好心的網友,幫幫忙,我的hp 1940是英文機,是否有辦法自己或是給商家改成中文機,然後搭配papago v7.3 gps地圖導航系統呢?
還請各問先進,能盡快告訴我,小弟在此先說聲謝謝!!
這裡有詳細的說明:
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions to unpacking the ROM Update files to a directory (NOTE: this directory should not contain any file or folder from any previous ROM Upgrade).
3. Establish an Activesync connection between your iPAQ Pocket PC and host PC through either the USB or Serial connection.
4. Execute the RUU.exe file in the directory created in step 2 above to begin the upgrade process and follow the instructions displayed by the ROM Upgrade Utility.
5. You may delete the self-extracting file downloaded in step 1 if you wish.
INSTALLATION NOTES:
1. During the update, the ROM Update Utility will:
- Query your device for current ROM image information.
- Validate that the new ROM image is compatible with
your device.
- Automatically place the iPAQ in flash mode.
- Update the ROM image on your device.
- Reset your device upon complettion.
2. Important: Disable the standby and hibernation modes on your host PC. If standby or hibernation are activated during the upgrade process, a critical error may occur.
3. Important: Plan for enough time to start and complete the update process. The total time to perform a ROM update is estimated to be as follows:
*USB - 20 minutes
*Serial - 90 minutes
4. Important: Do not interact with your device or remove it from AC power or the cradle/cable once the status bar appears on the iPAQ and the actual update has started.
5. Important: Users updating their device via a USB connection, should ensure their connection is directly to the Host PC. Connection through a USB hub (docking station port, Key Board port, USB hub, etc) while performing this update may cause a critical error.
6. If an error message is displayed during the process, follow any available instructions to correct the condition and start the utility again.
7. The update process can be performed while connected to a host PC as a Guest or with an established partnership.
內文搜尋
從 APP 打開
X