Cruise跟"一般"藍芽耳機(非A2DP)配對的問題。

小弟的cruise與原廠藍芽耳機BH-M200(單耳耳機非A2DP)配對
本來都可以正常的使用,可是常常在開車開到一半
就發覺耳機會自動與cruise斷線(會聽到耳機裡面出現斷線的聲音)
有時過一陣子就會再自動連線(又會聽到連線的聲音)
會這樣一直重覆出現...斷線...連線...又斷...

此時如果在斷線時有來電則藍芽耳機不會啟動
必須把藍芽耳機重開才可以再度連線
但是約莫過十幾分鐘後又會自動斷線
請問這樣該如何解決呢?

p.s.這問題在我剛買來就有了,一直忍到現在,以為是耳機的問題,可是我有把耳機跟我爸的K850i配對,2小時都沒斷過線。不知道是否也是韌體或Registry file可以解決!?

拜託大大幫忙解決這困擾已久的問題><
2008-06-21 9:10 發佈
我用D925也同樣有此情況,經多次求救同找尋,已成功完全解決,請看以下連結

原文:
http://forum.xda-developers.com/showthread.php?t=400752

程式:
http://forum.xda-developers.com/attachment.php?attachmentid=93241&d=1213683229
http://forum.xda-developers.com/attachment.php?attachmentid=93242&d=1213683229
謝謝大大的幫忙!
小弟這就來試試看:)
轉貼HTC英文官網:
翻譯 By 柚子

Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
修正:解決當重新連線至HTC Touch Cruise時,藍牙耳機的聲音問題。

If you are using the Bluetooth headset, 「Jabra JX10」, 「Jabra BT500」 or 「Samsung WEP 150」, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.
如果您的耳機為「Jabra JX10」, 「Jabra BT500」「Samsung WEP 150」這幾款,且連線至HTC Touch Cruise時,時常出現出界/無法連線的情況,導致就算成功的重新連線至HTC Touch Cruise,您仍然無法從藍牙耳機聽到任何聲音。如果您的耳機為上述幾款且出現這種情況請安裝此修正檔案。

附加壓縮檔: Cruise_BTheadset_mute.zip



Hot fix for resolving unsteady Bluetooth headset connection with HTC Touch Cruise
修正:解決藍牙耳機與HTC Touch Cruise之間連線不穩定。

When you are using a Bluetooth headset and the HTC Touch Cruise goes to sleep/idle mode, the Bluetooth connection becomes unsteady in certain circumstances. The Bluetooth headset may reconnect and disconnect intermittently. If this problem occurs, please install this hot fix onto your device.
當使用藍牙耳機且HTC Touch Cruise進入睡眠模式時,藍牙連線將變得不穩定,此時藍牙耳機或許會不斷間歇地連線、斷線。如果發現了同樣的問題,請安裝此修正檔案。

附加壓縮檔: Cruise_BTheadset steady.zip




Installation instructions
安裝須知

Follow the instructions below to download and install the hot fix on your device:
遵循下列指示開始下載并安裝修正檔案至您的裝置中:

1. Make sure you have Microsoft ActiveSync® installed on your Windows XP PC or Windows Mobile Device Center on your Windows Vista® PC. You can find Microsoft ActiveSync from this link or Windows Mobile Device Center from this link.
請確認您已經安裝了Microsoft ActiveSync®於您的Windows XP PC或是Windows Mobile Device Center(Windows Mobile裝置中心)在您的Windows Vista® PC上。

2. Connect and synchronize your device with your PC via Microsoft ActiveSync® or Windows Mobile Device Center using the USB cable.
以Microsoft ActiveSync® 或 Windows Mobile Device Center連接并同步您的裝置。

3. To download the hot fix, first select the check box below. Next, select the hot fix and the desired FTP site then click Download.
(柚子已將檔案傳至01上,如有版權問題請通知)

4. Copy the hot fix, which is an exe file, to your device.

To install the hot fix, tap the exe file and follow the on-screen instructions.
(將下載的壓縮檔解壓縮後得來的EXE執行檔複製到您的裝置並執行、安裝)

* If you performed a hard reset of your device, you need to reinstall the hot fix after the hard reset.
如果您的裝置進行了回覆預設值,回覆預設值後,您需要重新安裝此修正檔案。
原來,當錯過了結婚的衝動,結婚就變得遙遙無期~ 除非搞出了一條人命~
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?