*XDA討論串請點此
*目前版本 - 版本預計發行Beta及Stable兩種，Stable目前暫無
Beta - 1.02 build0136
Stable - none
tytung曾說過：sometimes more feature means more bugs．因目前仍不是非常穩定，請有興趣嘗試的版友盡量做問題回報，感謝！
*下載
Beta - Base Pakcage[CRC32:BFFA402A]
Beta - NAPP Pakcage[CRC32:F2D8DB2B]
cLK Pakcage [MD5: a6d1b73012966e90e706350a9826072c] (Thanks Daekin a lot! if no him we don't have this package to use!)
*簡述
1）Android 2.3.3，支援以免sd卡之NAND ONLY及a2sd方式運作。
2）支援三模式合一，Sense3/Sense2/無Sense。（安裝選單感謝dorimanx同意使用）
3）大量修改，幾乎原創。
4）支援UCO，User Custom Option，讓你可以在sd卡上放個檔案就關閉或開啟超頻/開機加速/oc deamon..etc
5）預設時脈1.28GHz，最高時脈1.61GHz
6）使用dorimanx之kernel故有zram支援，但他去掉了Low memory killer所以所有修改記憶體自動清除設定的app請全部移除，完全無效。包含很猛的Super Charger亦同，只能揮淚再見了
7）低剩餘記憶體不代表手機處在低速狀態
*User Custom Option
在SD卡根目錄上建立一個叫做Lunar之資料夾，並新增文字檔命名為以下名稱即可達到後述效果，免任何app。
1)enable-oc-deamon ----放入即啟動oc-deamon，移除代表關閉
2)enable-super-boot-boost ----放入即以1.61GHz開機，移除代表以1.2Ghz開機
3)enable-oc-to-161 ----放入開機完成後最高速鎖定在1.61GHz，移除則設定為1.2Ghz
4)enable-oc-to-153 ----放入開機完成後最高速鎖定在1.53GHz，移除則設定為1.2Ghz
5)enable-oc-to-100 ----放入開機完成後最高速鎖定在1.0GHz，移除則設定為1.2Ghz
6)enable-zram-350 ----放入開機即設定最多350mb zram，移除則為預設
7)enable-zram-175 ----放入開機即設定最多175mb zram，移除則為預設
8)enable-zram-88 ----放入開機即設定最多88mb zram，移除則為預設
9)disable-zram ----放入開機即關閉zram，移除則為預設
*可同時啟動多組，如oc-deamon及enable-oc-to-161。但enable-oc-to-161及enable-oc-to-100則只會啟動enable-oc-to-100之功能。
*總覽
A2SD / Nand-Only Common Include:
An Android 2.3.3 and Sense 2.1+3.0.
All Functions in Sense of Eclipse 2.5 . (exclude something below list.)
Barnacle Wifi Tether / Ti Backup / Dev Tools / Spare Parts / Leo AGPS injector / Newest Market
something more won't be list here immediately, pls see the change log...
Added:
Android 4.0 ICS Font set : "ROBOT" already inside.
Sense 3 Roise.apk(Sense3 Launcher) as default Launcher and it modify by me.
Lunar customized boot animation and the animation when power-off.
Keep Weather but modify animation and sound let animation became a stopped picture so reduce resource usage, we won't open Weather anytime , don't we?
enable cron tasks, for clean caches and swap.
support UCO, User Custom Option, look below.
something more won't be list here immediately, pls see the change log...
Removed:
Removed Sense.com service and some services, actually we don't used to use it and reduce battery drain.
something more won't be list here immediately, pls see the change log...
Modified:
com.htc.resources.apk and framework-res.apk , to reduce resource usage.
Tweak a lot of stuff about system, for more and more performance!
something more won't be list here immediately, pls see the change log...
Enabled:
SWAP Partition, just partitioned 1st as Fat32 , the second part as EXT4 and the third part as Swap partition then it'll be auto enable. (if exists.)
ZRAM, so if don't enable swap you will have Zram as swap space. and you can via the UCO to change the size of ZRAM.
Boosted:
Moved system frameworks to ram, so now an half system were be running in memory!
Boot boosting! default oc to 1.28Ghz when booting to reduce time waste. and you can via the UCO to change the Boot boosting from 1.28Ghz to the max 1.61Ghz.
System, OC and tweak some part for performance.
CPU speed oc to 1.28Ghz as default. and you can via the UCO to change the OC speed.
I/O , using sio as default scheduler, but also tweak and include sio and deadline already.
Safety, Check every partition for error at booting.
something more won't be list here immediately, pls see the change log...
NAND:
Mounted RAM as dalvik cache folder, so we can use all of data spaces and get a faster system.
something more won't be list here immediately, pls see the change log...
A2SD:
ODEX framework and system apps and user apps in A2SD version!
something more won't be list here immediately, pls see the change log...
*安裝
*）Radio 2.15.50.14 / HSPL 2.08 / MAGLDR 1.13 or cLK 1.4.0.1
*）無SD卡版支援，亦無打算日後支援。
*）檢查crc32與上列相同再行安裝，否則必定失敗。
*）首次安裝請確保wipe data/dalvik-cache
1）一律請使用HD2ToolKit分割磁區及安裝CWM，哪種CMW（4EXT/TOUCH）不拘僅版本需大於3即可。
2）SoL不管哪種版本磁區分割均為[System 225MB]/[Cache 5MB]，所以請確保使用HD2ToolKit做分割。
3）下載BASE package，視使用情況下載cLK package。
4）如不使用ext分割區，請下載NAPP package。
5）如要使用ext分割區，請下載A2SD package，並確保你的SD卡已經分割完畢。
6）進入CWM安裝，視需求依選單選擇Sense3/Sense2/無Sense。（Yes/No Menu thanks for dorimanx, He authorized me to use.）
7）完成後建議重開機一次後，再進行app安裝/還原動作。
*問答
*）我能由NAND升級到A2SD且不清除資料嗎？可。
*）我能在安裝後切換Sense3/Sense2/無Sense嗎？基本上可，但不建議。
*）如果我卡在灰色開機畫面怎麼辦？請參考本圖做問題回報。
*）我使用無Sense版本，但來電時不能接電話？解鎖後即可接聽電話。
*）我使用無Sense版本，但按下Launcher Pro左下角之電話圖案卻看不見已經匯入的聯絡人？將「Launcher Pro左下角之電話」之捷徑重設為「電話」app即可。
*）安裝完成後我卻不能使用無線網路？基本上重開機一次後即可，如仍不請回報。
*）我使用NAND版本及Sense3模式，但沒有全畫面天氣動畫？很遺憾，因為空間不足...。
*感謝
*）Big Thank for DFT Team, for Cotulla, for all of kernel builder, for Daekin and his Great Sense of Eclipse, no them no me. for the helps and discuss from dorimanx,zeppelinroxfor,Cheech1976. for everyone who devoted for Android on HD2 and for who created those tools for cooking Android system, and someone who supported all of devs and chefs, all thanks for yours.
*）For ODEX, thanks for Xylograph and his helps.
*）For yes/no menu and many things, thanks for Dorimanx and his helps.
*）For debugs, thanks for rasumia;bambuchko;htcfreak;ksokol.
