anbo435 wrote:
那可能是了 我裝NA...(恕刪)
NAND跟記憶卡的關係其實不大了
你刷刷看CM10或CM9會頓嗎?還是只有這版會?
小弟刷 NexusHD2-ICS-CM9-HWA_V2.8
這個版本可正常使開啟
若再刷 40ad2sdx-a2recovery
就會在開機到方塊飛舞時卡住
一直飛舞
試了2天
想不透
小弟的sd卡是16g c6
作ext4 1.2g
刷2.3.7版皆可正常
我有試
刷NexusHD2-ICS-CM9-HWA_V2.8時
3個選項都刷過
NAND
NAND with DataOnEXT
NativeSD (SD-EXT)
要擴充時就失敗
各位先進 先謝謝了
Mini0520 wrote :請問各位，小弟剛剛刷了 NexusHD2-JellyBean-4.1.2-CM10 V1.3a 許久，
記憶卡8G，Partition Size設350MB，SD CARD分割2048MB，刷的是 NAND，
現在一直狂卡在 Android is upgrading... opitimization app of48.
然後出現 starting apps. 之後就一直無限循環...... 請問小弟是哪裡做錯了嗎?
感謝! (已經等了半個小時以上重刷了兩次了)...(恕刪)
建議Partition Size設285MB，原文內提到安裝完整版建議用285MB代替200MB，設定350MB可能太大了，之前爬文有人提到設定太大，也會刷不過，供參考，祝刷機成功
The required system partition size for v1.3a is as follows:•Full install 285 MB
•Minimum Install (i.e. custom install with everything unchecked) 200 MB
•The minimal partition table when installing this ROM to NAND (Options 1 and 2):
•If you do a Full Install, you need 285 MB system partition instead of 200 MB below.
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
•Minimum Install (i.e. custom install with everything unchecked) 200 MB
•The minimal partition table when installing this ROM to NAND (Options 1 and 2):
•If you do a Full Install, you need 285 MB system partition instead of 200 MB below.
Code:
misc ya 1M
recovery rrecov|ro|nospr 5M cwm_recovery_leo.img
boot yboot|ro 5M
system ya 200M
cache ya 2M
userdata ya|asize|hr allsize
內文搜尋
從 APP 打開
X