Bugs:
Camcorder
Tethering can be buggy, needs reporting.
liola wrote:
請問有人刷CoreD...(恕刪)
我原本也是有你這問題，後來發現壓縮檔內其實有安裝說明檔的
First Time Flashing CoreDroid.doc
我就翻簡單白話一點
1. After downloading HD2 CoreDroid DHD V*.*.rar, extract it to a folder on your PC of your choice.
意思就是要你下載HD2 CoreDroid DHD V*.*.rar，並且解壓縮(裡面有MAGLDR 1.13、還有安裝檔HD2_Core_DroidDesire_HD_VXXX.zip)
2. Turn your unplugged HD2 on and boot into the MAGLDR 1.13 menu by holding down the power (right) button after initial vibration.
3. Using volume down move to number 5. USB Flasher
按住HD2開機鍵選擇5. USB Flasher 點通話鈕，記得USB要先接上PC
4. Push call button (left) and enter the USB flasher screen. You will see “USB Flasher mode Wait USB…”
5. Plug USB cable into the HD2, you should now see “USB Flasher mode Wait USB… USB
6. Go to the extracted HD2 CoreDroid DHD *.* folder on PC, and execute the DAF.exe. On newer windows buttons, right click and run as administrator.
執行壓縮檔附的MAGLDR 1.13資料夾內的DAF.exe
7. Press next twice, and the installation will begin.
8. When finished press finish.
安裝完畢
9. After the installation your HD2 will reboot into MAGLDR 1.13 menu.
重開機，，一樣長按開機鍵開機進入選單
10. Using the volume down button move to down to number 8. AD Recovery and press call button (left).
選擇8. AD Recovery 點通話鈕
11. Your unplugged HD2 will now boot into the ClockworkMod Recovery menu.
12. IF YOU DID NOT BACKUP YOU SDCARD DATA DO IT BEFORE YOU PROCEED IT WILL BE FORMATED.
13. With volume down button advance to the advanced menu press left button.
14. Advance down to Partition SD Card menu.
選擇Advance - Partition SD Card 選項
15. Select minimum (512m) maximum (1024m). Your choice which one to use. Recommended is the 1024m, then press call button (left).
這動作是切SD卡磁區，選擇512mb~1024mb，我是切1024mb
16. Select the 0m with the call button (left).
swap 給 0mb
17. Wait until the process is finished.
18. Do not reboot! Stay in the ClockworkMod Recovery.
不要重開機
19. When finished “done” will appear in the lower half of the screen.
20. Press right button.
21. Using Volume down button move to “-mounts and storage”
這步驟是讓HD2使用USB連上PC，選擇mounts and storage選項
22. Press end button (right).
23. Move down to mount USB storage
24. Press call button (left).
25. A new drive should be mounted to your PC.
你的PC會出現一各隨身碟的磁碟區，並且可以存取資料，如果不能代表沒連成功
26. Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
27. Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
28. Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F:).
將你的 HD2_Core_DroidDesire_HD_V1.XX.zip 複製貼上那各隨身碟磁碟區內(不要放在任何資料夾內)
29. When finished copying and unmounts is selected, press the call button (left).
複製完畢，點HD2通話鍵卸除隨身碟
30. Press the back button
31. Move down to “-install zip from sdcard”, and press call button (left).
選擇install zip from sdcard選項
32. Move down to “-choose zip from sdcard”, and press call button (left).
選擇安裝來源
33. Select the CoreDroid_V*.*.zip,
press left button
安裝CoreDroid_V*.*.zip
34. Wait till it´s finish flashing, you will then see a flashing “CoreDroid”. Flash options will reappear.
安裝完畢
35. Push end button (right).
按左箭頭鍵
36. Select “Reboot system now”
安裝後重開
37. Let HD2 reboot giving it time. Wait at least +/- 10 minutes.
Once the phone has booted, let the syncs take place, wait for about 20 minutes, then reboot.
開機後會出現你卡的那畫面等10-20分鐘即可進入
這版要多了一各切SD卡磁區的動作，你應該是少了這動作，當初我也是卡很久一直不成功
"跟拔不拔SD卡無關"，重頭到尾的步驟都不用拔SD卡
開啟後會無繁中選項，請從Market上下載morelocale2
祝你成功
別跟豬打架，得不到好處還會弄的一身臭
~~哈
內文搜尋
從 APP 打開
X