把舊愛升級到2003SE(英文版,可裝怪獸中文)只限ACER N30 適用!
從網上搜集得來巳忘了發放分享的人是誰,但感謝正在快樂使用中.
簡單說一下刷ROM的方法:
1.將下載到的解壓縮後,在
Eboot v3.7_SD Card_download可以看到兩個檔案.這是Boot的核心,要先升級才能刷ROM.
把這兩個檔案copy到記憶卡的根目錄,確保機器有電,插入SD卡,扳掉RESET(向左),按住電源,
扳回RESET(向右),心中默數五秒,放開電源,接著銀幕會一片白,感覺好像掛了,其實是在更新.
大約等個三分鐘,再扳掉RESET(向左),就可以了
2.將Upgrade裡面所有的檔案放到SD卡的根目錄(記得把剛剛那兩個檔案砍了),重複步驟1的按
電源,啓動,放開,接著會有英文字顯示刷ROM,稍待數分鐘即可
還原方式:
把原本執行Microsoft ActiveSync的連線設定內,允許USB的選項取消打勾後確定.
利用USB接上PC後會找到硬體,指向還原資料夾安裝驅動程式,再直接執行還原檔案內
AcerUSBUpdate_n30_v2.0.0.exe即可還原成繁體中文WM2003的ROM.同時Boot會一起被刷回成2.1
2003SE的差別:
1.可自由轉銀幕((橫/直)最佳辨法把此功能由快捷鍵控制)
2.沒中文(必需裝怪獸中文),CE star 是有點夾不來!!
3.ROM暴增12.2MB,約48M內存(在沒有安裝其它軟件時)
4.升級刻WMP10
5.其他SE版的更新
download link:
http://www.easy-sharing.com/427467/2003se-Upgrade.rar.html
翻得不好請看英文說明
Note: If you fail to upgrade ROM image, this might be caused by the SD card itself
or incorrect boot loader version. Please either change the SD card or upgrade boot loader
first. The boot loader upgrade procedure is the same as ROM upgrade.
1. Use an Apacer/Toshiba/SanDisk SD memory card
2. Unzip (or copy) all the files in the ZIP to the root of the SD card
used for the image upgrade. Please also note that only one image can be upgraded
at a time. For example, if you unzip (or copy) all the WWE files to the root of the
SD card, then unzip (or copy) all the FRA files to the SD, only FRA image will be
flashed to the device.
3. Set the n30 hard reset switch to left.
4. Connect the n30 to external power. (Use AC power)
5. Insert the SD card.
6. Press and hold the power button, and then set the hard reset switch to right.
7. You will see the screen becomes all white. Wait for at least 5 seconds,
then release the power button.
8. Wait for at least 2 minutes for an orange-colored progressing bar to show up.
9. If you don't see the bar after 2 minutes, please repeat from Step 3.
10. If you have tried several times but no success, the SD card you are using
can not be detected by the system. Pls pick another SD card, and repeat from
Step 2.
11. If you are upgrading OS ROM, the device will reboot when upgrade is done.
If you are upgrading boot loader, please hard reset the device when upgrade is done.
從 APP 打開
X