• 2

[求助]n300 usb to serial

不知楼上的朋友是否做出PL2313的驱动程序了?
能提供吗?
如果你眼力好, 又夠手定, 可以試試自己造一條rs232線出來的, 以下資料來自www.pinouts.ru
acer pin 1-3 接 rs232 pin 5
acer pin 5-12 接 rs232 其他pin
我都用mtoken的, acer n300 加上 vga 加上 rs232 的確一流!

Pin Nr. Classification Pin Name I/O Description
1 GND Signal ground, Battery charging ground
2 POWER GND Signal ground, Battery charging ground
3 GND Signal ground, Battery charging ground
4 N.C.
5 COM_DCD I Full Function UART Data-Carrier-Detect
6 COM_DSR I Full Function UART Data-Set-Ready
7 COM_RXD I Full Function UART Receive
8 COM_RI I Full Function UART Ring Indicator
9 COM_CTS I Full Function UART Clear-to-Send
10 RS232 COM_DTR O Full Function UART Data-Terminal-Ready
11 COM_TXD O Full Function UART Transmit
12 COM_RTS O Full Function UART Request-to-Send
13 USB CLIENT IO_DEV_USBN I-O USB Client Device D - (negative) signal
14 USB CLIENT IO_DEV_USBP I-O USB Client Device D + (positive) signal
15 USB HOST IO_HOST_USBN I-O USB Host Device D - (negative) signal
16 USB HOST IO_HOST_USBP I-O USB Host Device D + (positive) signal
17 POWER out VBUS O Provide power to USB device (PDA is host) (+)
18 POWER in USB_CHARGE I Charge battery via USB from external computer
(PDA is client). Two types of charging current :
19 POWER in USB_CHARGE I 100mA or 500mA depending on your power supply (+)
20 N.C.
21 EXT SPKR SPCAROUT O Speaker signal output to accessory
22 EXT SPKR DET CARDETECT I Detection : Turns off internal speaker if external is present
23 N.C.
24 +ADAP I Positive terminal of DC adaptor that powers the internal charging circuit of Li-Ion battery. The approved power supply is 5.0V ± 5% @ 2A
25 POWER +ADAP I
26 +ADAP I
This pinout may be incorrect in case of USB HOST connection used.

USB cable pinout

USB Pin USB Signal Acer pin(s)
1 USB +5V 18,19,24,25,26
2 USB D- 13
3 USB D+ 14
4 Gnd/shield 1,2,3
  • 2
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?