• 2

FRAM 機油濾心哪裡買

請問有人知道台灣哪裡買的到FRAM 機油濾心? 我需要的型號是PH2857A 謝謝
2008-01-28 13:26 發佈
文章關鍵字 FRAM 機油
FRAME 的油心是 Allied Signal 的產品﹐ 之前有人因為新引擎裝 FRAME 油心結果油心內部解體造成引擎內部被報銷。

苦主就買了新的FRAME油心拆開來研究結果發現裡面的防逆流閥門居然是紙做的!!

他結果連照片公佈在網絡上結果很快的就被 Allied Signal 律師控告強迫關站。
素八滷 福斯的車價 水貨車的保固 賓士的零件價格 法拉利的待料時間
請問市FRAM 還是FRAME?

逆止閥因該不是紙做的, 是矽膠(橘色的).

看看下面的連結吧

Fram Filter Study


Allied Signal 再1999 把Honeywell 給吃了, 不過卻放棄Allied Singal 而採用 Honeywell 的名子, 因此 Fram 歸屬在現在的 Honeywell 底下.

Bosswai1, 請確定一下料號 PH2857A 在這裡找不到
當初的文章現在已經被轉貼以及更新在 minimopar resource 網站﹕

http://minimopar.knizefamily.net/oilfilters/index.html

關於 FRAM 的油心評價你們自己看吧 轉貼自上面的文章﹐ 上面寫的很清楚防逆流閥門本身是橡皮﹐但是閥門週圍的材料是紙做的所以沒有防逆流的效果﹕

Fram Extra Guard

Years ago Fram was a quality filter manufacturer. Now their standard filter (the radioactive-orange cans) is one of the worst out there. It features cardboard end caps for the filter element that are glued in place. The rubber anti-drainback valve seals against the cardboard and frequently leaks, causing dirty oil to drain back into the pan. The bypass valves are plastic and are sometimes not molded correctly, which allows them to leak all the time. The stamped-metal threaded end is weakly constructed and it has smaller and fewer oil inlet holes, which may restrict flow. I had one of these filters fail in my previous car. The filter element collapsed and bits of filter and glue were circulating through my system. The oil passage to the head became blocked and the head got so hot from oil starvation that it actually melted the vacuum lines connected to it as well as the wires near it.

Fram Double Guard

Another bad filter idea brought to you by your friends at Fram. The filter itself is a slightly improved design over the Fram Extra Guard, but still uses the same filter element. It has a silicone anti-drainback valve, a quality pressure relief valve, and enough inlet holes for good flow. The big problem is that they are trying to cash in on the Slick 50 craze. They impregnate the filter element with bits of Teflon like that found in Slick 50. As with Slick 50, Teflon is a solid and does not belong in an engine. It cannot get into the parts of the engine that oil can and therefore does nothing. Also, as the filter gets dirty, it ends up filtering the Teflon right out. DuPont (the manufacturer of Teflon) does not recommend Teflon for use in internal combustion engines. Please do not waste your money on this filter.

Fram High Mileage

Yet another bad filter idea brought to you by your friends at Fram! Gotta love these guys. It's a Fram Extra Guard with a weird goo cartridge suspended on the clean side of the filter, blocking the outlet. It's supposed to be some kind of additive package, but if you want a high mileage oil, buy a high mileage oil. I don't trust these guys...sorry.

以上的 Fram 油心全部都歸類在 “不推薦使用的” (filters to avoid) 的類別

http://minimopar.knizefamily.net/oilfilters/opinions.html#avoid



不過 Fram 也還是有一種油心品質還OK被放在“推薦” (Recommended Filter) 清單

Fram Tough Guard

Even with all the problems of the other Fram filters, this one is not too bad. It has a heavier filter element with more surface area, a silicone anti-drainback valve, the cheap pressure relief valve, but with an integral screen to keep out large particles, and enough inlet holes for good flow. The only other drawback to this filter is that it is capped on each end with cardboard instead of metal. Looking in through the center outlet does not reveal any paper end caps, but they are there. I personally do not use this filter, but the design didn't have enough bad qualities to cause me to tell others to avoid it.
素八滷 福斯的車價 水貨車的保固 賓士的零件價格 法拉利的待料時間
liquidgroove990 wrote:
請問市FRAM 還是...(恕刪)


我放圖讓你看一下 因為這是我家跑車在用的機油濾心 但是每次都要從英國郵寄過來 我覺得很麻煩 想說看台灣能不能買到 比較方便


bosswai1 wrote:
我放圖讓你看一下 因...(恕刪)


不如將你的車行貼出來, 可以找到其他對應的型號, 或是在Fram 的網站上找到濾蕊的尺寸, 也可以在台灣尋找尺寸相同的東西使用就好了.

幾個尺寸要看的.

Anti-Drain Valve YES
Product Height
Product I.D. 20mmx1.5mm Th'd (牙)
Product O.D. 3.02" 外俓
Relief Valve Setting PSI 12 (洩壓力量)

liquidgroove990 wrote:
不如將你的車行貼出來...(恕刪)


我需要的是1991年LOTUS ESPRIT SE 的濾心 老車了 很多零件都是直街跟英國定. 在從英國寄過來的 很麻煩


家裡的另一台EXIGE的零件就好解決了 直接跟TOYOTA 共用引擎 連機油濾心都是TOYOTA MARK
bosswai1 wrote:
我需要的是1991年...(恕刪)


哇﹐兩臺蓮花..

我家在台灣也有一臺 1973 Triumph Spit Fire 以及一臺 1973 MG MGB.
素八滷 福斯的車價 水貨車的保固 賓士的零件價格 法拉利的待料時間
Pachilla wrote:
FRAME 的油心是...(恕刪)


東西要能在美國上架賣......可不是製造出來就能上架的...
如果有問題絕對會被告到 一厥不振的
像是先前Firestone 的輪胎
jerrychen0067 wrote:
東西要能在美國上架賣...(恕刪)


如果這樣那麼 Microsoft 早就被告倒了。

之前 Windows 95,98,ME 有那個不是問題一堆還不是照賣﹖

Intel Pentium CPU 問題

Firestone 的問題也是一個例子

美國誰的律師厲害誰就是贏家。
素八滷 福斯的車價 水貨車的保固 賓士的零件價格 法拉利的待料時間
  • 2
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?