richard_feline wrote:
最近購入E250, ...(恕刪)
前幾頁就有jeol1620網友有提及強迫關機方法喔
就是久按開關電源鍵15秒以上...
請按我看看<--
我是翻山越岭，跋山涉水才摸到這里的
關注這里多日后我也弄了一个e250
几日以來 ，可謂每况逾下
我只是下了最新的软體
不只持中文，想改回去
試了論壇上几個方法
不见效果
昨晚聽完歌，關機
今天早上开機就停在那裏了
那箇該死的鳄鱼
這箇办髮不灵
{1. Download the 01.01.06p firmware from the link.
(下載檔案SKU_P.zip)
2. Make sure your player's USB mode is in MSC. You can go to "settings"->"USB mode" to change it.
(先到USB mode,確定你的mp3 player是在MSCmode)
3. Turn off the player then restart the player under "Recovery mode" by:
(把mp3 player先關機,然後做以下三個步驟)
a. Putting your player on "hold". (把mp3 player上方的hold開關打開到HOLD mode)
b. Pressing on the "record" key of the player while you turn on the player. (一邊按著mp3 player 左方的 Record 鈕不要放,一邊按電源開機)
c. After the instrucion appears on your player, connect it to your computer. (等到螢幕出來後.接到電腦上)
4. The player will appear as a "16mb disk device" or something similar on your
computer.
(你的mp3 player會以" 16mb disk device" 硬碟名子顯示在電腦上 (近到我的電腦就可看的到))
5. Unzip Sku_P.zip.
(把剛剛下載好的Sku_P.zip解壓縮)
6. Copy the .mi4 and .fnt file to the "16 MB system device".
(複製所有 .mi4 跟 .fnt的檔案到那個"16 MB system device"硬碟當中)
7. Disconnect the player, unlock the "hold". The player will restart.
(將mp3 player拔離電腦,把hold關掉,讓mp3 player重新開機)
8. Change the player's language setting into Japanese or Chinese, according to your need.
(開機後.到了language setting就會有日文以及中文的選項出現)
9.Now the tags with Asian fonts can be display correctly.
(選擇中文後.中文就會出現拉!!)
}
這箇也不灵
{
格式化後重灌韌體即可
(直接丟MI4檔進去 重開機就完成了)
1.02.20P.MI4 原版韌體檔下載
http://nuclearscripting.com/other/sansafw/1.02.20P.MI4
}
怎么办呢？难道大陸的不同嗎？
麻烦大家了
內文搜尋
從 APP 打開
X