我還是沒法解決
所以我把我設定密碼的畫面貼出來吧
我比較笨
所以希望可以講得簡單一點
不好意思麻煩各位了
謝謝
IANCHUNG wrote:太好啦，
感謝各位的關心我還是...(恕刪)
先設定好passphrase
（然後或許要按那個128bit生成）
然後iBook
[系統偏好設定]。[網路]。[網路狀態裡選AirPort按{設定}按鈕]。[根據預設加入按下方加號填入SSID跟選WEP 40/128位元 16進位 然後填入填入key1的hex值（喵。用26位的）]。
記得SSID要填跟ap設定一樣的，上面只有一張圖，喵。懶喵。抱歉啦。
然後可以上了的話，這設定記錄下來。之後連線的話，就從MenuBar上AirPort圖示選該SSID囉。
記得解決了的話，標題要改[已解決]喔～方便的話啦～哈哈。:)
話說回來，順道問問，有沒朋友會設定其他項目的？喵。也求教囉～
喵。 wrote:
太好啦，先設定好pa...(恕刪)
其實好像不必用到 hex 設定那麼麻煩? 原 PO 可以試試看 Apple 官方網頁關於 Airport Client 連到非 Apple 無線網路 AP 的設定說明
http://docs.info.apple.com/article.html?artnum=106424
For Earlier AirPort software versions
If you want to join a non-Apple encrypted wireless network from a computer
with an AirPort card, you must use one of two different styles for password
entry; and it must be the one chosen by the network administrator. They are:
1. ASCII password
If you were given a password that may be plain language, containing
characters from the full range of ASCII, use the double quotation mark (")
before and after the password. These are case-sensitive, and they are five
characters long for 40-bit encrypted networks or 13 characters long for
128-bit encrypted networks.
Example of 40-bit: "pw123"
Example of 128-bit: "password12345"
2. Hexadecimal password
If you were given a password that uses only the hexadecimal range of
characters (which are: abcdef0123456789), put a dollar sign ($) before
the password. These passwords are 10 characters long for 40-bit encrypted
networks or 26 characters long for 128-bit encrypted networks. In a
hexadecimal password, the dollar sign is called the Hex Escape. It notifies
the software that the characters that follow it should be treated as a
hexadecimal number. Other possible hex escapes are "0x" and "0X" (zero-x,
and the "x" may be upper or lower case).
Example of 40-bit: $1234abcdef
Example of 128-bit: $12345678901234567890abcdef
簡單的說就是如果你的 Airport card 是 2.1 以前的版本,在加入非蘋果 AP 加密網路的時候
ascii 密碼 ---> 頭尾要加上 "
Hex 密碼 ---> 密碼頭要加個 $
原 PO 可以試看看,或許你的 iBook Airport 版本正好是舊版的
，不好意思,問了個笨問題
？）
內文搜尋
從 APP 打開
X