煩請板主將此篇文章刪除！謝謝造成大家困擾！不好意思！
I used Disk Utility and Partition Manager from 7tools http://7tools.com/pm/index.htm
First, I put a HD into an external enclosure. Then, I made 2 partitions in Mac by Disk Utility. Then format 1 partition into HFS+ and leave another one as free space. Then use a PC and run Partition Manager to format the remain partition as FAT32. DONE.
This is a faster and easier way to do it. I spent like 3 days to figure out how to do it by asking around and countless testes.
BUT. Later I found out to format 1 HD into 2 format is a very bad choice. First, it works just fine. But when the drive has formating problem. There is NO way to fix it. Not even DiskWarrior. And I learn this in a hard way.
So it is a give or take. It is conviente but you might risk to lost ur data. In fact, I can save everything on the FAT32
partition, but not on HFS+. Cause there is not possible to mount the drive at all.
it is your choice.
Also, if you must do it. Try to get the Partition Manager 2004, not 2005. Cause it has unlimited function free trail.
None loves me...
不過樓主寫的文章頗為艱深 小弟我提供另外一個方法給大家參考 因為我在10.3時就是這樣用的 
首先用MAC Disk utility幫硬碟做分割 對其中一個槽格式化 另外一個槽不管他
下次你要去同學那抓東西的時候 再用它的XP把剩下的地方格式話就好啦 
當然最好是格式化成FAT32 所以如果大於30G就看你同學有沒有partition magic或是你要割成兩個槽啦 這樣你就有一個MAC格式的分區以及一個兩個都可以用的分區
給大家參考囉
我個人認為這樣比較簡單啦........
不過這樣在窗戶的電腦上會看不到MAC格式的分區
內文搜尋
從 APP 打開
X