我今天使用我的燒錄機,從硬碟備份資料,但都燒錄失敗,會在更新PMA 失敗,請問是什麼原因?是燒錄機壞了嗎,可是這台買回來三個多月,但燒不道10次,之前也沒有碰過這問題,但使用光碟複製,就可以順利完成.以下是燒錄的資料.
Dylan
Hidylan
1A23-0003-6030-1540-3821-9170
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 08:18:06 PM
Nero版本: 6.3.1.17 (Nero Express)
燒錄器： 版本: QS0C - HA 1 TA 0 - 6.3.1.17
界面卡驅動程式： HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: 版本: 3.0B - HA 1 TA 1 - 6.3.1.17
界面卡驅動程式： HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-532E-B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON LTR-52327S F: CDRom0
TEAC CD-532E-B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 49283072 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 319MB (327152kB)
Free physical memory: 93MB (95604kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.7.2004
CD-ROM(ISO)
07:29:24 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
07:29:24 PM #2 Phase 90 File dlgbrnst.cpp, Line 1845
啟動防燒壞保護
07:29:24 PM #3 Text 0 File Reader.cpp, Line 118
Reader running
07:29:24 PM #4 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52327S running
07:29:24 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
07:29:25 PM #6 Text 0 File Burncd.cpp, Line 3172
Turn on 軌道一次燒錄(TAO), using CD-R/RW media
07:29:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 19835 ( 4:26.35)
07:29:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
07:29:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON LTR-52327S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
07:29:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
07:29:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 19836 (19836) = #19836/4:24.36
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 19834 blocks [LITE-ON LTR-52327S ]
--------------------------------------------------------------
07:29:25 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON LTR-52327S ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 40931328, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
19836 | lead-out | 1 | 0x00 | 0x41
07:29:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 19836 -> 19834.
07:29:25 PM #14 Phase 24 File dlgbrnst.cpp, Line 1845
檔案暫存作業開始
07:29:25 PM #15 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
07:29:25 PM #16 Phase 25 File dlgbrnst.cpp, Line 1845
檔案暫存作業完成
07:29:25 PM #17 Phase 36 File dlgbrnst.cpp, Line 1845
以52x (7,800 KB/s)的速度開始燒錄
07:29:25 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
07:29:25 PM #19 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON , SMART-BURN : ON
07:30:04 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
07:30:59 PM #21 SCSI -1194 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04
07:30:59 PM #22 CDR -1194 File ThreadedTransferInterface.cpp, Line 1830
更新 PMA 失敗
07:30:59 PM #23 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 1830
無法執行結束軌道
07:30:59 PM #24 Text 0 File Mmc.cpp, Line 15226
start Close Session
07:31:30 PM #25 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00
07:31:30 PM #26 CDR -1176 File WriterStatus.cpp, Line 245
結束區段錯誤
07:31:30 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 245
無法進行結束區段的動作
07:31:30 PM #28 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
07:31:30 PM #29 Text 0 File Mmc.cpp, Line 15226
start Close Session
07:31:30 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
07:31:30 PM #31 Phase 38 File dlgbrnst.cpp, Line 1845
以52x (7,800 KB/s)的速度燒錄失敗
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002/08/29 09:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
從 APP 打開
X