先聲明...心臟夠強的可以試看看...小弟也是門外漢...還盼懂狀況的大大指導
首先感謝對岸網站提供的資訊
http://www.newbietech.net
在這裡找到改卡資料
http://www.nvworld.ru/php/viewtopic.php?t=12273
依照提示的方法
1.下載 FFGL8x000
2.下載&執行DriverCleaner (網站連結斷了...需要自己去找...也不太會用...亂搞一通)
3.重新啟動,按F8進入安全模式,手動安裝Mobility FreefireGL T2 (4E54)
4.DLL's-小弟不太懂是什麼(就給她省略過去了,這裡盼了解的大大開示)...直接從新開機...
5.從下列的測試,感覺上是成功了...只是沒有"組態"選項...也許是DLL沒進行的問題(一般M11大約PROE02的成績是7~10之間)
再測一次Specviewprof 7.1 Run All
成績進步這點還好,不過之前跑PROE跟CATIA出現的顯示錯誤問題似乎也解決了...
pm1.4/ 9200 64mb/ 768ram/ sp2/
i use omega driver and oc to 270/270
and just for someone who is interested in
spce viewperf 7.1
3dsmax-02 Weighted Geometric Mean = 5.228
drv-09 Weighted Geometric Mean = 27.78
dx-08 Weighted Geometric Mean = 38.73
light-06 Weighted Geometric Mean = 9.677
proe-02 Weighted Geometric Mean = 8.782
ugs-03 Weighted Geometric Mean = 5.349
spce viewperf 8.0
3dsmax-03 Weighted Geometric Mean = 5.138
catia-01 Weighted Geometric Mean = 6.911
ensight-01 Weighted Geometric Mean = 2.666
light-07 Weighted Geometric Mean = 5.485
maya-01 Weighted Geometric Mean = 6.220
proe-03 Weighted Geometric Mean = 8.266
sw-01 Weighted Geometric Mean = 4.873
ugs-04 Weighted Geometric Mean = 2.145
你比我快多了...
here is Fujitsu Siemens CELSIUS H210 2.0 GHz ATI Mobility FireGL T2e result.
http://www.specbench.org/gpc/opc.data/vp8/...210/config.html
3dsmax Weighted Geometric Mean = 18.02
Catia Weighted Geometric Mean = 10.01
Ensight Weighted Geometric Mean = 8.41
Light Weighted Geometric Mean = 15.79
Maya Weighted Geometric Mean = 15.64
ProE Weighted Geometric Mean = 13.02
SW Weighted Geometric Mean = 8.96
Ugs Weighted Geometric Mean = 10.72
and it has no real effect for the ati mobility 9200 (5c61)
even changing it to the mobility firegl (4c66)
no any improvment can be found at all.
when i tried using other combination, no one can be installed sucessfully but the mentioned above.
so what i can do is to wait the next version.
thx stll.
內文搜尋
從 APP 打開
X