dslme wrote:
請問這個軟體支援Co...(恕刪)
可以啊
我是用這台↓
HP NC 6430
T2400 166*11=1833 / 1.262v，降到1.050v
溫度由全速滿載的70度降到58度
真的不錯用唷
生命的輕重，在於一輩子對與錯的總和
請問有大大是使用P4的CPU成功的嗎？能否教教我怎麼設定，謝謝。
(真的太吵了，從開機到關機前，風扇都是一直全速在跑，即使我什麼都沒動！)
以下是我的設定：
General:
Management:
Advanced
95/11/10更新：
11月初得到andrewp大大的PM回履，特地將此問題的回履與大家分享。
P4 只有 Pentium 4/D 600/800/900 series 有支援 P-State 的功能!
我的 CPU 型號 是B0 .... 沒有支援
要P4 型號 是 N0...的才有支援
所以我的CPU是沒有支援的。殘念……
===== 我是分隔線 ===== 分隔線 =====分隔線 =====
以下為官方說明：
Processors
Current release of RMClock utility implements the CPU frequency, CPU load and throttling level determination on the following processor models:
AMD K7 (Athlon/XP/MP, Duron, Sempron) and K8 (Athlon 64/FX/X2, Opteron, Dual-Core Opteron, Sempron, Turion/Turion X2) family processors.
Intel Pentium II/Celeron, Pentium III/Celeron, Pentium M/Celeron M, Pentium 4/Celeron (Northwood and Prescott cores), Pentium 4 Extreme Edition (Gallatin and Prescott cores), Xeon (Prestonia, Nocona, Cranford, Irwindale, Potomac, Paxville and Dempsey cores), Pentium D and Pentium Extreme Edition (Smithfield, Presler and Cedar Mill cores), Core Solo/Core Duo (Yonah core) and Core 2 Duo/Core 2 Extreme (Conroe/Merom/Woodcrest cores).
Dynamic P-state transitions are supported on:
AMD Athlon 64/FX/X2, Sempron, Turion/X2, mobile Athlon 64, Opteron and Dual-Core Opteron featuring AMD Cool`n'Quiet(tm) technology.
Mobile or Low-Power Desktop AMD Athlon XP featuring AMD PowerNow!(tm) technology.
Intel Pentium M (all cores), Core Solo and Core Duo (Yonah core), Core 2 Duo and Core 2 Extreme (Conroe/Merom/Woodcrest core) featuring Enhanced Intel(R) SpeedStep(tm) technology (EIST).
Intel Pentium 4 600 series (Prescott N0 core), Intel Xeon (Nocona, Cranford, Irwindale, Potomac, Paxville and Dempsey cores), Intel Pentium D 800/900 series, Intel Pentium Extreme Edition (Smithfield, Presler and Cedar Mill cores) featuring Enhanced Intel(R) SpeedStep(tm) technology (also known as Demand-Based Switching).
NOTE: Intel(R) SpeedStep(tm) technology and the "old" vision of Enhanced Intel(R) SpeedStep(tm) technology found in mobile Pentium III-M and mobile Pentium 4 processors are not supported, and the support for these technologies is not planned. These technologies are entirely different from the supported "true" Enhanced Intel(r) speedStep(tm) technology found in Pentium M, Core Solo/Duo, Core 2 Duo/Extreme, Pentium 4/D 600/800/900 series and Xeon processors.
內文搜尋
從 APP 打開
X