因為不想每次都插拔GPS的SD卡..所以打算使用米迪亞提供的同步程式連線直接連到GPS
小弟從官網下載了兩個檔案..activesync422-tw 跟 G2S_Driver兩個壓縮檔
activesync422-tw 解壓縮後已經安裝在PC端出現Microsoft ActiveSync連線程式
但是G2S_Driver這個檔案要放在哪??
麻煩有連線成功的大大幫忙解答下..感謝!
下面是G2S_Driver解壓縮後的說明檔內容..看不懂要怎樣安裝..
;
; Windows CE USB Host Setup File
; Copyright (c) 1999 Microsoft Corporation
;
; WCEUSBSH.INF -- This is the inf installation script for the stand-alone
; release of serial-over-USB host driver for WCE USB Function devices.
;
[Version]
Signature="$CHICAGO$"
Class=WCEUSBS
ClassGuid={25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
Provider=%MICROSOFT%
[ControlFlags]
ExcludeFromSelect = *
[DestinationDirs]
DefaultDestDir = 12
NTCopyFiles = 12
Win9xWDMFiles = 10,system32\drivers ; %windir%\SYSTEM32\DRIVERS
[NTCopyFiles]
wceusbsh.sys
[Win9xWDMFiles]
wceusbsh.sys
;
; Class Install section
;
[ClassInstall]
Addreg=Interface_ClassReg
[ClassInstall32]
Addreg=Interface_ClassReg
[Interface_ClassReg]
HKR,,,,%Interface.ClassName%
;HKR,,NoInstallClass,,1
HKR,,SilentInstall,,1
HKR,,Icon,,-20
[Interface_ClassReg32]
HKR,,,,%Interface.ClassName%
;HKR,,NoInstallClass,,1
HKR,,SilentInstall,,1
HKR,,Icon,,-20
;
;
; <VENDOR SECTION>
; Add your manufacturer name here (and a string definition under [strings] below)
;
; e.g.
; %ACME%=ACME
;
[Manufacturer]
%Anchor% = Anchor
%Socket% = Socket
;
; <VENDOR SECTION>
; Add your manufacturer section and device entry here.
; Use the hardware PnP ID of your device.
;
; e.g.
; [ACME]
; %USB\VID_xxxx&PID_yyyy.DeviceDesc% = Host_Inst, USB\VID_xxxx&PID_yyyy
;
[Anchor]
%USB\Vid_0547&Pid_2720.DeviceDesc% = Host_Inst, USB\Vid_0547&Pid_2720
[Socket]
%USB\Vid_0104&Pid_00BE.DeviceDesc% = Host_Inst, USB\Vid_0104&Pid_00BE
;
; Win 9x DDInstall section
;
[Host_Inst]
Copyfiles = Win9xWDMFiles
AddReg = Host_Win9x_AddReg
[Host_Win9x_AddReg]
;HKR,Parameters,DebugLevel,0x3,0xffffffff
HKR,,DevLoader,0,*NTKERN
HKR,,NTMPDriver,,"wceusbsh.sys"
;
; Win NT DDInstall section
;
[Host_Inst.NT]
CopyFiles=NTCopyFiles
AddReg = Host_Inst_NT_AddReg
[Host_Inst_NT_AddReg]
HKR,,FakeHostParms,%REG_DWORD%,0x123
[Host_Inst.NT.Services]
AddService = wceusbsh,0x00000002,Host_Service_Inst, Host_EventLog_Inst
[Host_Service_Inst]
DisplayName = %Host_Inst.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
ServiceBinary = %\wceusbsh.sys
LoadOrderGroup = Extended base
AddReg = Host_User_Parms
[Host_User_Parms]
;
; BUGBUG - remove the following entries before ship
;
HKR,Parameters,DebugLevel,0x00010001,0x3
[Host_EventLog_Inst]
AddReg = Host_EventLog_AddReg
[Host_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\wceusbsh.sys"
HKR,,TypesSupported,0x00010001,7
[Strings]
;----------------------
REG_DWORD = 0x00010001
MICROSOFT = "Microsoft"
Host_Inst.SVCDESC = "Windows CE USB Serial Host Driver"
Interface.ClassName = "Windows CE USB Devices"
;
; <VENDOR SECTION>
; Define your strings here
;
; e.g.
; ACME = "ACME"
; USB\VID_xxxx&PID_yyyy.DeviceDesc = "ACME USB Device"
;
Anchor = "Anchor"
USB\Vid_0547&Pid_2720.DeviceDesc = "Anchor USB EZ-Link Cable"
Socket = "Socket Communications"
USB\Vid_0104&Pid_00BE.DeviceDesc = "Socket USB Sync Card"
!
內文搜尋
從 APP 打開
X