請教各位大大，如何將ipag H3950用的GPS轉換成H3630用的(底部接頭的腳位如何對應？)，謝謝！
1. V_ADP +5V POWER IN
2. V_ADP +5V POWER IN
3. DTR RS-232 DATA TERMINAL READY 接DB9#1 DCD & #6 DSR
4. GND POWER GROUND
5. CTS RS-232 CLEAR TO SEND 接DB9#7 RTS
6. RTS RS-232 REQUEST TO SEND 接DB9#8 CTS
7. TXD RS-232 TRANSMIT DATA 接DB9#2 RXD(接GPS Data In)
8. RXD RS-232 RECEIVE DATA 接DB9#3 TXD(接GPS Data Out)
9. DCD RS-232 DATA CARRY DETECT 接DB9#4 DTR
10. GND POWER GROUND
12. UDC_P USB POSITIVE DATA SIGNAL
12. USB_N USB NEGATIVE DATA SIGNAL
iPAQ 3850/3950 PDA接頭端腳位定義
1 V_ADP (+5V) POWER IN
2 V_ADP (+5V) POWER IN
3 V_ADP (+5V) POWER IN
4 V_ADP (+5V) POWER IN
5 Reserved
6 RS232 DCD 接DB9#4 DTR
7 RS232 RXD 接DB9#3 TXD(接GPS Data Out)
8 RS232 TXD 接DB9#2 RXD(接GPS Data In)
9 RS232 DTR 接DB9#1 DCD & #6 DSR
10 GND POWER GROUND 接DB9#5 GND
11 RS232 DSR N.C.
12 RS232 RTS 接DB9#8 CTS
13 RS232 CTS 接DB9#7 RTS
14 RS232 RING N.C.
15 GND POWER GROUND
16 N.C.
17 USB Detect
18 N.C.
19 USB - UDC +
20 N.C.
21 USB - UDC -
22 GND POWER GROUND 接DB9#5 GND
dw 於 2003-09-19 14:49 修改過
那些長久以來享有諸多權利的人，忘了這是由許多人犧牲奉獻換來的。
內文搜尋
從 APP 打開
X
X
複製連結