[WM6 QVGA+少量VGA主題]綜合風格(載點修復中)

Mark5347
個人積分：2006分
文章編號：3813481

2006分

樓主

2007-10-11 19:58

小弟之前曾經發過兩篇有關於主題佈景的文章,分別是女生專用以及男生專用,反應迴響還不錯!
但是有些網友發了私人訊息給我說:難道除了極度女生和極度男生之外,就沒有些較為中庸一點的風格嗎?
答案當然是:有呀~

青菜蘿蔔各有所好!
有的人喜歡真黑,有的喜歡粉嫩,當然有也有人喜歡其他風格的主題佈景,為了服務廣大的網友需求,小弟搜括了一些其他風格的主題佈景,現在就將他們分享出來吧~

點此下載

再給各位看看主題佈景跟HTC HOME的互相配合,可以怎麼玩?

[WM6 QVGA+少量VGA主題]綜合風格(載點修復中)

看了上圖後,有沒有頓時變成日本風的感覺呢?或許有人會覺得是台客風...暫不討論這個問題...

如果想要麻將風的HTC HOME時鐘字體,可至seven_0311分享的HTC 數字鐘 ~麻.將.風~ 萬子．索子

如果想要修改HTC HOME的話,可去參考小弟之前寫的其他三篇文章...
[9100+WM6教學]非HHCv0.8b方式的更換HTC HOME圖標
[QVGA分享]自製HTC HOME的LCD時鐘字體
[分享]HTC HOME - 6TAB KUSO游標

另外,我外加一個佈景主題是特別要給Mobile 01的懺悔兄,因為這個佈景主題中跟他的01頭像一樣喔!
所以小弟特別指定送給他用啦~
吼吼~佛心來的嘛!

搭上利利嘎咕分享的HTC HOME的國字版時鐘字體,簡直是絕配!!
[WM6 QVGA+少量VGA主題]綜合風格(載點修復中)

附加壓縮檔: 懺悔兄專用QVGA主題1枚.zip
當然如果其他的師兄師姐想用,也是歡迎下載囉!求個平安嘛!

歡樂的時間總是過的特別快,又到時間說掰掰!

感謝耐心收看,謝謝各位!!

==========以下內容會不定時新增==========

10/12新增:主題10枚(QVGA + VGA主題)
10/12再新增:咒怨IIQVGA主題1枚

10/13新增:經典電玩遊戲主角3+1枚(QVGA + VGA主題)
10/13再新增:主題15枚(QVGA + VGA主題)

2007-10-11 19:58 發佈

文章關鍵字 WM6 QVGA+ VGA 主題綜合風格

antonhsu

antonhsu
個人積分：223分
文章編號：3813980

223分

2樓

2007-10-11 21:10

好漂亮的佈景主題
謝謝分享

satyoa

satyoa
個人積分：0分
文章編號：3814315

0分

3樓

2007-10-11 21:53

謝謝Mark兄，分享這麼優的主題。

還細心指導如何安裝，整個很貼心！

bubulin

bubulin
個人積分：6分
文章編號：3814530

6分

4樓

2007-10-11 22:18

好棒啊!!

~
還有懺悔專用耶~

~
但是..都是QVGA..我的是VGA..

iiiox

iiiox
個人積分：343分
文章編號：3815767

343分

5樓

2007-10-12 0:19

耶~~~Mark兄再度發功!!超超大感謝!! 糖果兌換券五分來囉

Mark5347

Mark5347
個人積分：2006分
文章編號：3817724

2006分

樓主

2007-10-12 10:17

iiiox wrote:
耶~~~Mark兄再...(恕刪)

都都都...快蛀牙了...可以換別的東西嗎?
例如:Touch Flo for CHT9100...或是818pro一支啦...等等之類的...

https://www.instagram.com/mark5347/

hsiangyang

hsiangyang
個人積分：438分
文章編號：3817898

438分

7樓

2007-10-12 10:38

嗯～雖然不適合我(我是喜歡美女桌布的中年男子)，但還是要幫分享的大大加滿分！
剛剛搜尋了一下 Mark 大的發文，真的是超用心的在分享桌布。

PS 看到那張佛心的懺悔兄專用桌布，我真的笑了！

懺悔

懺悔
個人積分：33分
文章編號：3818393

33分

8樓

2007-10-12 11:35

Mark5347 wrote:
小弟之前曾經發過兩篇..另外,我外加一個佈景主題是特別要給Mobile 01的懺悔兄,因為這個佈景主題中跟他的01頭像一樣喔!
所以小弟特別指定送給他用啦~
.(恕刪)

嗚嗚..Mark5347兄真是佛心來的

讓我感動..痛哭..又流涕....

我沒辦法加分...唯一的9100 Mark5347大也有一隻了
只好...只好...以身相許表示感謝.....

來吧....等你喔.... 流口水

題外話..怎麼把桌面藍色的字變成黑色的?

請常唸....南無觀世音菩薩

iiiox

iiiox
個人積分：343分
文章編號：3818572

343分

9樓

2007-10-12 11:57

Mark5347 wrote:
都都都...快蛀牙了...(恕刪)

換9100的touchflo 手指滑動控制好不好丫

.... XDA efrost 10/12正式發功 !! (哇咧..想買9100 or 9110了@_@)

為了大家的方便，我先把傳案傳上來囉^^

TouchFlo下載
原網頁說明/討論/下載

安裝說明:
1. 安裝cab
2. 開始功能表中執行Start FTouchFlo
3. 開始螢幕定位
4. 定位完全後FtouchFlo就會自動執行

註：
1.安裝完若出現"Bad calibration data...".或 " "Calibration unsuccessful". 請重新執行精確點筆定位動作
2. 若出現Can't find Calibrate.exe時，請直接到程式集內執行程式
3. 預設螢幕定位和FTouchFlo的定位不能並存，若要停用FtouchFlo或使用預設螢幕定位請重新開機

特色說明：
1. 和一般的touchflo技術一樣，可分辦手指滑動及觸控筆點選、拖曳等動作
2. 從每次"觸控"到螢幕的時間算起，0.2秒內若無移除"手指"或"觸控筆"位置，就會被視為一般觸控筆點選、拖曳動作 (嘿嘿，時間速口以調滴啦)

-------------以下為原文-------------------
Update 2007-10-12:
Alpha version is available!

You have to install cab as usual and run "Start FTouchFlo" from StartMenu/Programs.

Calibration routine will be started -> you'll see white screen with point at the center of screen.

Please, point with your STYLUS (not a finger!) to points you'll see. There will be 5 points as usual calibration has.

After that calibration routine will be closed and FTouchFlo will start automatically.

How it works:
There is just two functions available for now: scrolling and "standard windows behavior".

You can scroll contents of windows where are scroll bars. You should start scrolling in a 200 milliseconds after you finger or stylus touched screen for the first time.

If you'll not start scrolling within 200 milliseconds, "standard windows behavior" function will start working: selection, tap-n-hold or just tap.

As you, probably, already understood, to work "in usual way" you just don't have to move your finger or stylus fast at the beginning.

So, just try it and everything will be clear!

Possible problems:
1. You may get message box "Bad calibration data...". It means that during calibration you're pointing not so precisely, so, please, repeat calibration procedure.
2. You may get message box "Calibration unsuccessful". It means that calibration routine didn't succeeded to calculate necessary data for calibration. In this case you should try to calibrate once more and if you'll have the same result inform me, please.
3. You may get message box "Can't find Calibrate.exe". Try to run Calibrate.exe manually from the program folder and inform me about this problem.
4. Standard windows calibration application will not work when FTouchFlo is running. Softreset device to stop FTouchFlo to use standard windows calibration.

Additional info:
1. To perform calibration once more you should run Calibrate.exe from FTouchFlo program folder.
2. If your touch screen doesn't react - just softreset device.
3. To stop FTouchFlo you should softreset device.

Thank you!

P.S. Don't forget about donations ... It is really hard to find free time.

P.P.S. In advance I want you to excuse me for my English and probably not so clear explanations. It is 3:10 a.m. now...

P.P.P.S. You may use this software on your risk. I'll not take responsibility for possible problems... and so on and all stuff like this.

---------------------------------------------------------------------

Update: Scroll function videos: scroll 1 and scroll 2

Hi to all owners of HTC PDAs who wants to use TouchFlo but their PDAs doesn't support it!

After a deep research how touch screen works and communicates with gwes I've made an application which is able to intercept all stylus movements and process it or forward to gwes.

It is still necessary to do a lot of things like calibration and other stuff, but in fact it works!

I'll continue working but I really don't have much free time, so your donations will speed up development.

-=<Here>=- and -=<Here>=- you can see how it works now. It can recognize movements in four directions and start selected programs: Internet Explorer, Calculator, TMail and File Explorer.

Also I am looking for your ideas how to use this software... there are few possibilities I noticed and going to implement:
1. Start programs depending on direction (like it works now).
2. Use it for scrolling with finger.
3. Create a library so any developer can use it to implement their ideas.

Thanks a lot for my friends (Pavel and Sergey) who are working on this software. Without their help such progress wouldn't be possible.

EDIT: I forgot to mention that I've tested it on HTC Trinity, but I'm sure it will work on any HTC PDAs with touch.dll written according to Microsoft specification.
-------------以上為原文-----------------

Mark5347

Mark5347
個人積分：2006分
文章編號：3818586

2006分

樓主

2007-10-12 11:58

懺悔 wrote:
只好...只好...以身相許表示感謝...(恕刪)

唉唷~夭壽喔!修道人怎麼口以動不動就以身相許啦!
佛祖說過:弟子千萬不可淫亂!!

懺悔 wrote:
題外話..怎麼把桌面藍色的字變成黑色的?...(恕刪)

想藍色字體變黑色的方法這裡應該有?我沒試過所以我也不知道~
男生專用!真黑色差教學之08/25又再次新增:簡易更改主題配色小程式(再次感謝iiiox兄的大力相挺)

https://www.instagram.com/mark5347/