did you apply the method i gave you? did it work on your handset? if you konw how to deal with alternative input method ie chinese input, please also tell me
there is a software that i have installed on my a920. That software can input chinese with roman keypad. ie there is not such ㄅ ㄆㄇㄈvirtul keypad. Also the input method is not quite good because you have to produce all the words you need and copy them. and then paste it whatever u are applying for. So kind of takes time. but as far as i know there is the only way now.
of course, u can install directly p800chinese package on your handset. but the problem is u won;t be able to get into control pannel\text to change the alternative method. I think this is because the original input method is stored under Z: (ROM) which is not allow you to change anything.
So here i would like to give some of my experiences and hope anyone who can fix this problem. please post your experiences on.
Also please give me a email if you have successfully installed any chinese software..
Thanks
my email is miliu8@hotmail.com
1. 手機會發出電磁波, 即使頻帶不同(GSM=900/1800, GPS=1500),
近距離下也會干擾, 同一手機的通話過程可以用echo cancel消除原發射訊號,
但是GPS並無echo cancel的設計, 所以GSM訊號發射時應該會干擾GPS.
有使用過PDA裝GPS的就知道, 即使PDA沒有手機功能, 仍然會干擾GPS模組.
2. GPS模組消耗功率功率很大, 一般使用GPS的手持裝置, 電池耗電量都很大,
撐不到幾個小時. 如果A920 [內建GPS], 手機應該撐不了多久.
3. GPS接收器大多使用 broadband patch antenna, 需要有一小塊電路板
大概3cm見方左右, 上面不可以佈任何電子零件, 只能當天線用. 如果內建,
手機體積應該也不小.
我想最好等有人實際使用過他的GPS再下評斷.
AGPS不是像 GPS用衛星來定位
而是用三角定位法 算出發話手機的位置 再由系統廠商將所在地相關資訊傳到手機
要有這個服務需要兩大要素
1.手機裡的CHIP要啟動
2.系統廠商提供這項服務
缺任何一個都不行
UK 3G 和Aussie 3G論壇的相關討論很多
雖然一些測試報告說 誤差約50公尺
但有網友反應 定位可以誤差到3英里
所以
A920無內建GPS
沖著GPS所以想買a920的人可以不必考慮了
倫敦吃喝玩樂的朋黨
firstly i read those references from aussie3g website
and the following are the steps how i did it.
1. ensure u have upgraded ur phone urself or thru motorola repair centre.
2. install the jar app/games
3. if u see nothing happened then it means the path is not correct.
4. use jtext this software to view the txt file installed under c:/system/app/[213312f4]/[132134r4].txt--------->say example la
5 or view this txt file by transferring to computer
6. u will see on notepad says c:/system/MIDLets/temp.jar-----> that's the excute path.
7. so just change the file name u have installed to temp.jar
8. start the program and it should be working
example, u installed a program called A, and u will be able to find A.jar under c:\system\MIDLets\[12314d4]\A.jar. just just A.jar to temp.jar then everthing should be fine..
內文搜尋
從 APP 打開
X