經本人實際測試過後,
N707真的會增加些許功能,與N1接近點,(據聞N505也適用此法)
會增加的功能如下,
-1.M-timer鬧鐘設定,
-2.個人碟片記憶,
-3.自動時間標記,
-4.麥克風敏感度調整,
-5.聲音輸出模式,
-6.可調整的錄音速度(-80%~+110%)
打開隱藏功能方法如下,
進入service mode:
將主機"HOLD"功能開啟,
一直按著"VOL -"這個鍵,把它當"Shift"來用,
依續打入以下按鍵,
FF FF REW REW FF REW FF REW PAUSE PAUSE
此時再放開所有鍵,若您成功進入Service Mode,
此時螢幕上應會秀出firmware version等資訊.
(版本1.300, 1.400確定可用此技法)
此時在依下列順續改變兩個設定後拔出電池,
再放入電池就可以了...
Change Setting 1:
Press VOL + -- you should see "MANUAL" displayed on the left and "0 00" on the right.
Press PLAY -- you should see "Laser" on the left and "0 10" on the right.
Press VOL + 5 times -- you should see "F Code" on the left and "0 60" on the right.
Press PLAY -- the first 3 digits of the left display should be continuously incrementing. The last 2 digits of the left display are a value in memory that you want to change (it probably reads "A0" for the MZ-N707 and "??" for the MZ-N505, but write this number down!). You should see "0 61" on the right.
Press VOL + repeatedly until the last two digits of the left display read "FE" (you can press VOL - if you go past it).
Press PAUSE
Change Setting 2:
Press PLAY -- you should again see incrementing numbers in the first 3 digits of the left display and "0 62" should appear in the right display. The last two digits of the left display are the value you want to change (it probably reads "50" for the MZ-N707 and "??" for the MZ-N505, but write this number down!).
Press VOL + repeatedly until this reads "7B" (you can press VOL - if you go past it).
Press PAUSE
此時覺得... Sony還真是在"耍心機",
明明有的功能還鎖住??
