昨天手賤把用的好好的6615GT從DD-WRT刷成TOMATO, 但是咧...沒有用TELNET進ROUTER裏的
密碼讀出來(但是DD-WRT Web based的ID跟密碼都有記著了), 在刷成TOMATO後, 機器都正
常, 所有在DD-WRT的設定都還在, 但是呢....用DD-WRT的密碼跟帳號就進不去TOMATO的管
理界面了(也試過telnet, 結果都一樣), 爬了一堆的文後, 試過ID: root/admi,
pw: admin/root都一樣, 也試過了...都不行, 不知有無大大有解的呢?
2008-01-22 22:42 發佈
Why doesn't my password work?[toc, link]
Make sure you're entering the username "admin" or "root". Unlike the Linksys firmware, they are required in Tomato.
If you're upgrading from the DD-WRT firmware, telnet into the router *before* upgrading and type "nvram get http_passwd". The result will be your password in Tomato. This is necessary because of a change in DD-WRT's way of using the standard http_passwd variable.
If you have a Buffalo router or a Linksys with a pushable Cisco logo, push the AOSS/Cisco button for at least 20 seconds, then telnet into the router on port 233. Type "nvram get http_passwd" to retrieve the password or "nvram set http_passwd='your_new_password'" followed by "nvram commit" to set it manually. Reboot the router using the command "reboot" after using this method.
If nothing else works, push the reset button for a few seconds to reset all of the settings. The default password after resetting is "admin".
內文搜尋
從 APP 打開
X