請問刷tomato無線基地台 - 想用[網路線]做WDS連接的設定方式

感謝回答
目前兩台各有三種MAC
A:
Router's LAN MAC Address = A1:A1:A1:A1:A1:A1
WAN 的 MAC = A2:A2:A2:A2:A2:A2
Wireless 的 MAC = A3:A3:A3:A3:A3:A3
B:
Router's LAN MAC Address = B1:B1:B1:B1:B1:B1
WAN 的 MAC = B2:B2:B2:B2:B2:B2
Wireless 的 MAC = B3:B3:B3:B3:B3:B3

請問用實體網路線連接的MAC 也是用Wireless的MAC連接？
Wireless Mode = [Access Point + WDS] 和 Wireless Mode = [WDS] 用實體網路線的設定方法也一樣？

※請問有使用過的大大指導一下，感恩 ^ ^

=================================================== 以下是tomato的說明
#1 - 00:11:11:11:11:11
The WAN port of this router is connected to the Internet.
WAN
(configure normally)

LAN
IP Address = 192.168.1.1
DHCP Server = enabled

Wireless
Wireless Mode = Access Point + WDS
SSID = samessid
Channel = 3
Security = WPA Personal
Encryption = AES
Shared Key = samesharedkey
WDS = Link With
MAC Address = 00:22:22:22:22:22 (the *wireless* MAC of the 2nd router)

#2 - 00:22:22:22:22:22
The WAN port of this router is not used.
WAN
Type = Disabled

LAN
IP Address = 192.168.1.2
Default Gateway = 192.168.1.1 (the 1st router's IP address)
Static DNS = 192.168.1.1 (the 1st router's IP address or any DNS server)
DHCP Server = Disabled (the 1st router handles it)

Wireless
Wireless Mode = Access Point + WDS
SSID = samessid
Channel = 3
Security = WPA Personal
Encryption = AES
Shared Key = samesharedkey
WDS = Link With
MAC Address = 00:11:11:11:11:11 (the *wireless* MAC of the 1st router)