關於思科1240AG使用CONSOLE 設定

請問各位大大
目前我在玩一台型號為AIR-AP1242AG-P-K9的AP
進去WEB模式以後印象中似乎是將DHCP的部分打勾
結果現在用telnet無法進去原本AP也無法在使用瀏覽器進去WEB模式
好不容易去借到一條console cable使用終端機進去之後卻一直跑出一堆裝置狀態不能輸入指令
狀態的訊息如下

lashfs[0]: 147 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 5043712
flashfs[0]: Bytes available: 10955264
flashfs[0]: flashfs fsck took 28 seconds.
Base ethernet MAC Address: 00:17:95:b1:12:0c
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
link auto-negotiating....
auto-negotiation takes 10000 milli-seconds to complete
ERROR: timeout waiting for auto-negotiation to complete
ERROR: fail to bring ethernet link up

The system has been encountered an error initializing
ethernet port. You may need to check hardware
The system is ignoring the error and continuing boot.
If you interrupt the system boot process, the following
commands will reinitialize ethernet, tftp, and finish
loading the operating system software:

ether_init
tftp_init
boot

Loading "flash:/c1240-k9w7-mx.123-8.JA/c1240-k9w7-mx.123-8.JA"...###############
################################################################################
################################################################################
################################################################################
################################################################################
####################################################################

File "flash:/c1240-k9w7-mx.123-8.JA/c1240-k9w7-mx.123-8.JA" uncompressed and ins
talled, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.3(8)JA, RELEASE SO
FTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 27-Feb-06 09:17 by ssearch
Image text-base: 0x00003000, data-base: 0x007729E0

Initializing flashfs...

flashfs[1]: 147 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 5043712
flashfs[1]: Bytes available: 10955264
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1242AG-P-K9 (PowerPCElvis) processor (revision A0) with 24566K/81
92K bytes of memory.
Processor board ID FOC10163XMT
PowerPCElvis CPU at 266Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:17:95:B1:12:0C
Part Number : 73-10256-04
PCA Assembly Number : 800-26918-04
PCA Revision Number : A0
PCB Serial Number : FOC10163XMT
Top Assembly Part Number : 800-26965-03
Top Assembly Serial Number : FHK1020401P
Top Revision Number : A0
Product/Model Number : AIR-AP1242AG-P-K9



Press RETURN to get started!


*Mar 1 00:00:05.501: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
est passed
*Mar 1 00:00:06.973: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 0
*Mar 1 00:00:07.325: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar 1 00:00:08.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1
*Mar 1 00:00:10.568: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:10.570: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:10.820: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:10.820: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.3(8)JA, RELEASE SO
FTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 27-Feb-06 09:17 by ssearch
*Mar 1 00:00:10.820: %SNMP-5-COLDSTART: SNMP agent on host ciscoair13 is underg
oing a cold start
*Mar 1 00:00:10.835: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power s
ource
*Mar 1 00:00:10.867: %DOT11-6-FREQ_SCAN: Interface Dot11Radio1, Scanning freque
ncies for 8 seconds
*Mar 1 00:00:10.911: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:00:11.570: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Mar 1 00:00:11.837: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Mar 1 00:00:11.837: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
*Mar 1 00:00:12.911: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:18.660: %DOT11-6-DFS_SCAN_START: DFS: Scanning frequency 5320 MHz
for 60 seconds.
*Mar 1 00:00:18.660: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5320
selected
*Mar 1 00:00:18.667: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

*Mar 1 00:00:19.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to up
*Mar 1 00:00:20.667: %LINK-3-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:21.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar 1 00:01:17.834: %DOT11-6-DFS_SCAN_COMPLETE: DFS scan complete on frequency
5320 MHz
接著就停住了,請問該如何處理
謝謝各位大大