沒想到設定Routing後不但可用OpenVPN_Server ,Transmission下載也可運作
(真感謝ulimie大的指導,讓我受益良多)
關閉RT-N16的連線功能:
OpenVPN Server啟用:
OpenVPN Client:
OpenVPN Server狀態:
Transmission下載:
或許是RT-N16連線功能關閉系統負載率低的關係,
Transmission操作起來很順暢完全沒先前遲頓的感覺
- Compile bcm_nat as module 註*
- New routers supported – BIG THANKS FOR @tvlz
- Revert „rp-pppoe: added version 3.11″. Back to version 3.10. This should fix some problems with disconnecting PPPoE WAN.
- dnsmasq: update to Simon version 2.67rc4
- Transmission: update to 2.82
- Release new build for Asus RT-N66U using SDK6 (RT-AC branch). Checkout K26RT-AC directory in download section)
- Update/add new 3G modem modules
- Add comgt tool and gcom scripts. Add Strength Signal info in syslog
- Fix one bug in ethstate script
- usb_modeswitch: ver. 2.0.1 with data package 2013-08-07
- Access Restriction: delete a rule don’t work using Chrome/Firefox (known) browser.
- Rewised WL driver for RT-AC branch. Version Jul 31 2013 18:46:03 version 6.30.102.9 (r366174)
- Import asuswrt kernel to K26RT-AC branch – for devs info
- Allow coexistance of N build and AC build. Branch tomato-shibby-RT-N will not be continue. Please use RT-AC bracnh- for devs info.
註*
Many users have >100Mbps WAN speed. BCM_NAT can give us ~30% speed-up WAN->LAN.
BW Limiter will not works when this module is loaded.
If we enable QoS then bcm_nat will be disabled.
If someone need a higher WAN speed and doesn't use BW Limiter/QoS, he can enable Broadcom FastNAT:
modprobe bcm_nat
BTW this module works only with K26RT and K26RT-N branches. RT-AC doesn't support bcm_nat for now.
43A wrote:
114版好像進步很大...(恕刪)
我是n66u，我刷了他新板說的RT-AC for N66U，感覺是還ok，但因為網路只有中華60/15M還無法得知有什麼進步。
114RT-AC的device list有速度顯示bug，有時候會出現破表的無線速度顯示數字，當然實際效能不可能有這麼高，其它bug我還沒發現。
我目前在用toastman 7503.1
sin777 wrote:
shibby官網有放...(恕刪)
汗顏!從WRT-54GS時代就習慣用 Victek 版本,升級 RT-N16 亦是,Tomato RAF 1.28.9006
一直使用到今年初;因為 IPv6 的關俙才在 102~108~110 版與 7502.1 間交換使用,感覺 7502.1 好像有稍微順暢一點點,一直到 112版 感覺 RT-N16 重新啟動變快了,連接數據機時取得 IP 尤其是 IPv6 好像有比較快一點,無線也覺得很穩定,感覺 112版 比以前版本進步很多,所以就用 112版到今天;今早更新了 114版,覺得開網頁又更順暢了, IPv6 一插上數據機,馬上取得,尤其是yahoo各個網站,圖片一下就都開完(有用網友教的 MTU1492腳本),一整個爽! 感覺像是換了機子. 感謝您!
原本是 110 AIO CHT 版本,從110發佈用到上週..很穩定沒斷過.
但上週末網路出現 爆ping 瞬斷的情況.
打中華客服詢問.重整線路..機房那邊沒問題 >_<
索性刷114 AIO , 目前沒有再出現類似的情況,也沒Device List 速度Bug的問題.
建議刷軔體時要記得打勾 After flashing, erase all data in NVRAM memory
刷好後 到 Administration --> Configuration --> Restore Default Configuration --> 2選一,做一次重置或清除的動作.
另外請教 : 有網兄使用 shibby 110~114 在功能設定重開後, Overview -> WAN -> Status -> connecting 要很久才會撥接上網路?
(P880 單純當數據機沒硬撥沒開DHCP)
內文搜尋
從 APP 打開
X