raxel wrote:
我覺得都有關係耶我用...(恕刪)
對呀 每個節點的速度都會造成網路差異，也是要查的原因及問題
我們這邊都是當初請工班一次拉到定位，後面就不會查太多節點問題
美林 wrote:
AVEN138板主大...(恕刪)
Brawn0918 wrote:
恩 阿，我也好想知道...(恕刪)
小弟手上也僅有一台RT-N16，目前有幾項測試工作正在進行，
所以要測各家韌體效能這種工作看來也只能等有空閒時再來測。
如果有廠商願意提供測試機，那就再好不過了
數位天堂 http://digiland.tw/
build 50 - 09/04/2010
---------------------
Added Web Monitoring (domains and searches) with GUI using kernel and
iptables modules by Eric Bishop from Gargoyle Project
(http://www.gargoyle-router.com).
DNS rebinding protection in dnsmasq is now optional (can be turned off
in GUI). Fixed connectivity issues with some applications (i.e. Netflix
iPad app) related to this protection being active.
Support for Asus WL-500g Deluxe (untested), fixed support for Linksys
WRT-300Nv1 in both - K26 and K24 - builds.
Added Hurricane Electric IPv6 Tunnel Broker IPv4 endpoint address updater
to Dynamic DNS services.
Added Unicode support to httpd server - used for Web Usage display, and to
show commands output on the Tools->System screen.
Fixed error displaying USB Support GUI page when attached drive's label or
model name contains quotes.
Fixed timing bugs with restarting dnsmasq and other services - thanks to Ray
<ray123> for finding and analyzing these problems.
Allowed auto-mount of file systems not supported by the firmware as long as
corresponding kernel module for this file system is loaded.
Allowed to set radio power up to 400mW (26dBm) - this will only work for
some router models and some countries.
Removed some Busybox applets (ftpput, clear, setconsole) from Lite builds
to reduce size.
Minor CIFS kernel driver fixes from upstream.
Software updates: PPTP kernel drivers and accell-pptp client 0.8.5-rc1,
Busybox 1.17.2, FTP Server (vsftpd) 2.3.2, ntfs-3g 2010.8.8 (in Extras
builds), usb_modeswitch 1.1.4 with data package 2010-08-26.
Toolchain: updated binutils to ver. 2.20.1.
Simplified custom builds by allowing to specify nvram size at compile time
(can be used to make special builds for Linksys E-series routers with 60KB
nvram).
Cosmetics and code clean up.
* Kernel 2.6-based builds only (beta20):
Support for dual-band (2.4 and 5 GHz) wireless-N radios. Only single radio
interface is currently supported and can be configured via GUI (so no
simultaneous dual-band just yet). Tested on Linksys WRT-320N. Experimental
(not tested) support for Linksys WRT-610Nv2 (single radio only). Many thanks
to Dominique <dbt78> for pilot implementation and lots of testing!
Fixed very bad misconfiguration issue witn MiniDLNA media server causing it
to erase all files in the media directory if the same directory is specified
as the media database location.
Fixed board data partition size for Netgear routers to prevent flashing a
firmware image that's too big.
Fixed occasional wireless disconnects during data transfers for some
routers (namely Asus RT-N12, other models might be affected too).
Disabled DFS server in Samba 3 to prevent errors when using with certain
Linux clients (thanks to yatu for finding the issue and suggesting a fix).
Fixed /dev/null, /dev/zero, /dev/gpio nodes permissions for non-priveledged
users (needed for some additional software).
Preliminary support for IPv6 in Extras and USB+VPN editions: all required
kernel modules are included, iptables and other user space applications are
compiled with IPv6 support activated, included radvd daemon. Firewall is not
configured, no GUI configuration exists yet, and by default IPv6 is disabled
on all interfaces!
Various kernel bug fixes and optimization patches backported from upstream
2.6 kernel (mostly network/conntrack and USB related).
Added support for GUID (EFI) partition tables.
Removed unused decoders from building FFMpeg library used by MiniDLNA -
significant size reduction.
Software updates: MiniDLNA 1.0.18 (cvs 2010-08-31), libraries used by
MiniDLNA (sqlite 3.7.2, zlib 1.2.5, FFMpeg 0.6).
www.linbas.com
dacota wrote:
小弟手上也有一台RT...(恕刪)
感謝dacota兄願意拔刀相助，小弟把當初測試環境及方式如下：
測試環境：
請準備兩台 GbE 界面的主機，client 需另俱備 802.11n 無線網卡
網路線：CAT-5e 以上
無線連線模式：WPA2-personal AES / Bandwidth:40Mhz
WAN to LAN：以 DMZ 模式測試
MTU,Jumbo frame 皆為系統預設值
測試工具：
iperf 同時開5個session，連續測試60秒
server 端指令：iperf -s
client 端指令：iperf -c [server ip] -w 128k -t 60 -P 5
測試方式：
RT-N16分別刷四種版本韌體，每一韌體皆需分別測試 LAN to LAN、LAN to WLAN、LAN to WAN及WAN to LAN 等各模式下的 iperf 數值。
刷機有其風險，請務必注意韌體轉換過程中的風險。
數位天堂 http://digiland.tw/
內文搜尋
從 APP 打開
X