，不過有個錯誤大家都沒有看到，RB450G的Sessions連結數
是將近有50萬，不是只有4萬而已...
kingofsdtw wrote:
2.2登入後介面
連結數4萬，絕對不是4千普通分享器
(這張是IE登入)
HIMALAYAS wrote:
將近6個月前的開箱文...(恕刪)
僅供參考:
我用iperf 2.0.5, 2.0.4 測 RB450G NAT mode, Router OS是5.5版;
CPU 680MHz, MIPS 24Kc V7.4, 測試時CPU Load 會跑到 100%
RAM 256MB
Bad Blocks 0.1%
iperf server 設在WAN端, iperf client在LAN 端, Queue 都設成unlimited(無限制)
C:\>iperf -s -P 5 -i 5
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 5.0 sec 19.1 MBytes 32.1 Mbits/sec
[ 7] 0.0- 5.0 sec 22.3 MBytes 37.4 Mbits/sec
[ 6] 0.0- 5.0 sec 5.14 MBytes 8.63 Mbits/sec
[ 5] 0.0- 5.0 sec 13.1 MBytes 22.0 Mbits/sec
[ 8] 0.0- 5.0 sec 8.63 MBytes 14.5 Mbits/sec
[SUM] 0.0- 5.0 sec 68.3 MBytes 115 Mbits/sec
[ 4] 5.0-10.0 sec 30.6 MBytes 51.3 Mbits/sec
[ 5] 5.0-10.0 sec 14.0 MBytes 23.5 Mbits/sec
[ 6] 5.0-10.0 sec 6.54 MBytes 11.0 Mbits/sec
[ 7] 5.0-10.0 sec 3.15 MBytes 5.28 Mbits/sec
[ 6] 0.0-10.0 sec 11.8 MBytes 9.86 Mbits/sec
[ 4] 0.0-10.0 sec 49.9 MBytes 41.7 Mbits/sec
[ 7] 0.0-10.1 sec 25.5 MBytes 21.3 Mbits/sec
[ 5] 0.0-10.1 sec 27.2 MBytes 22.7 Mbits/sec
[ 8] 5.0-10.0 sec 13.4 MBytes 22.4 Mbits/sec
[SUM] 5.0-10.0 sec 67.7 MBytes 114 Mbits/sec
[ 8] 0.0-10.1 sec 22.1 MBytes 18.3 Mbits/sec
[SUM] 0.0-10.1 sec 137 MBytes 113 Mbits/sec
之前測的NAT mode數據,最高到130Mbps, 低一點到113Mbps
RouterBoard 網站上的數據是bridge mode.
=====================
把LAN bridge刪除,然後..開機就當機,
只好進console mode, 用admin登入,
還沒到>提示符號就當機,
只好把CPU降到100M,再登入,可以到提示符號,
再用/system reset-configuration 之後就不會當機了,
再把CPU 設到800MHz,
重測iperf server 設在WAN端, iperf client在LAN 端
C:\>iperf -s -P 5 -i 5
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 5.0 sec 19.5 MBytes 32.7 Mbits/sec
[ 6] 0.0- 5.0 sec 27.2 MBytes 45.6 Mbits/sec
[ 7] 0.0- 5.0 sec 12.9 MBytes 21.6 Mbits/sec
[ 8] 0.0- 5.0 sec 13.3 MBytes 22.4 Mbits/sec
[ 5] 0.0- 5.0 sec 44.4 MBytes 74.5 Mbits/sec
[SUM] 0.0- 5.0 sec 117 MBytes 197 Mbits/sec
[ 4] 5.0-10.0 sec 14.9 MBytes 24.9 Mbits/sec
[ 5] 5.0-10.0 sec 33.5 MBytes 56.2 Mbits/sec
[ 6] 5.0-10.0 sec 34.4 MBytes 57.7 Mbits/sec
[ 7] 5.0-10.0 sec 22.8 MBytes 38.3 Mbits/sec
[ 8] 5.0-10.0 sec 13.2 MBytes 22.1 Mbits/sec
[SUM] 5.0-10.0 sec 119 MBytes 199 Mbits/sec
[ 8] 0.0-10.0 sec 26.6 MBytes 22.3 Mbits/sec
[ 6] 0.0-10.0 sec 61.6 MBytes 51.6 Mbits/sec
[ 4] 0.0-10.0 sec 34.4 MBytes 28.8 Mbits/sec
[ 5] 0.0-10.0 sec 78.1 MBytes 65.3 Mbits/sec
[ 7] 0.0-10.0 sec 35.8 MBytes 29.9 Mbits/sec
[SUM] 0.0-10.0 sec 236 MBytes 198 Mbits/sec
所以CPU調到800MHz, 刪掉bridge, NAT可以到200Mbps....
=====================
關於Queue,謝謝樓下的提示.
1. POE port 不知是供電端還是 受電端?
2. 還有就是 如果我家網路 是大樓社區網路
社區分配了我兩個IP 但是只有一條線接近來
我可以用這台一個 wan port 設兩個IP 達到頻寬 加倍嗎???
內文搜尋