請問i-tech CLIP RADIO如何與手機配對阿??

axcc3834 wrote:
我的手機是v3i,用...(恕刪)

1. Place the headset and the mobile phone where they are no more than one metre apart.
2. Ensure the headset is off. (The status indicator is unlit and does not flash.)
3. Press and hold the MFB until the headset’s status indicator flashes blue and red alternately.
4. Activate your mobile phone’s Bluetooth function. Please refer to your mobile phone user guide for details.
5. Set the mobile phone to search for Bluetooth devices within the one metre range, as instructed in the mobile phone user guide, and select “i.Tech Clip Radio” from the
list.
6. Enter the pre-programmed passkey “8888” and press “OK” to pair your headset and mobile phone. When the pairing is completed, the headset’s status indicator will
flash blue rapidly for five times followed by a long beep.
7. Go back to your mobile phone’s main menu. For certain mobile phone models, once the headset is activated, a headset icon will be shown on the screen. You should
now be able to make and receive calls using your headset.
IMPORTANT: If the pairing cannot be completed within two minutes after the pairing mode has been activated, the headset’s status indicator will flash purple-red
accompanied by three beeps and will then turn off automatically. Please repeat steps 2 to 7 above to pair the headset and the mobile phone again.

kalun wrote:
離應該是一米吧, 一公尺還得了.......(恕刪)