TP-Link TL-WR1043ND 刷回原廠韌體

有一個使用者是這樣成功的
所以我把方法貼在下面
需要的人可以試試看
謝謝
1. install SSH
2. use root to login dd-wrt with router password
3. enabled all of the USB support in DD-WRT including auto-mount USB option.
4. download wr1043_mod.rar
5. unrar, copy tplink.bin to a USB thumb drive.
6. insert this thumb drive to router.
7. check if your usb thumb drive installed correctly by using "mount" under linux
8. mtd -e linux -r write /mnt/tplink.bin linux (in case you put your bin file in "/" directory of your USB thumb dirve)
9. wait a few minutes, don't power down, until SSH close the link.
2010-06-10 16:25 發佈
感謝您提供這個方法,請別忘了把 wr1043_mod.rar 的連結也一併貼出來
數位天堂 http://digiland.tw/
Aven138 wrote:
感謝您提供這個方法,...(恕刪)


15151515151515151515
感謝兩位熱心分享寶貴密技,經"實驗"證明此法確實有效
數位天堂 http://digiland.tw/

arcworld wrote:
幫補一下連結:htt...(恕刪)

如果刷掛了話~
一樣可以用這個方法回復嗎?
謝謝!
各位大大您好:

此機我由數位天堂論壇得知,台灣剛上市就購買,已經超過二年了,買來就刷了DD-WRT,但是陸續發生瞬斷、或是無法連線,非常無力,礙於使用非原廠韌體,所以也沒辦法送修,沒多久後就改買TP-LINK 941ND,用到現在都沒發生什麼問題,用得很順,看了版主的留言後,我想說刷回原廠韌體看看,依照版主提供的方法,但是卻出現了下列訊息,可否請各位網友幫我看一下是出了什麼問題嗎? 感激不盡!!

USB已經成功載入,但是卻出現"could't open image file"這個訊息,我的韌體檔名叫"1043.bin"




內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?